🚰 Hydraulics, Pneumatics & Plumbing

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

WHAT YOU WILL GET? – The hose clamp kit comes with totally 40 pcs hose clamps with 7 size range, enough for your spare and replacement in daily life around you house, garage, lawn and garden. DURABLE 304 STAINLESS STEEL –The hose clips are made of high quality and premium heavy duty 304 stainless steel material that are more salt resistant, anti-rust…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

90-degree elbow for connecting two pipes or tubes at an angle. 45-degree flared construction for a stronger connection than soldered. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Operating temperatures range from -65 to 250 degrees F. Suitable for copper, brass, aluminum, and steel tubing. These fittings…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

【Model】2V025-08 Solenoid Valves(2 Way Normally Closed ). 【Size】AC110V/1/4''NPT(Please air in the direction of the arrow above the product). 【Temperature Range/Pressure Range】 0-140°F;25-116PSI. 【Feature】 A valve response rate of up to 5 times per second. 【About Fittings】In each product, we provide 1/4 Push to connect fittings, you don't need to buy again…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Adapter for connecting pipes or fittings of different types. Male National Pipe Taper (NPT) threads on one end and female NPT threads on the other for connecting pipes with different ends. Please see NPT Thread - chart to determine the correct size required. Pipe Size and actual Thread OD are different. The Thread OD is larger than the Pipe Size. Brass…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

For use with select Monitor models. Manufactured with a quality construction. Easy installation. For use with 13/14 series tub and shower faucets. Pressure balanced for consistent water temperature. Genuine Delta repair part. Lifetime limited warranty covers parts and finish defects. Monitor single-function pressure-balance cartridge.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Designed to secure duct components together, such as ducting and fans. Stainless steel (SAE grade 316) construction with worm drive lock. Each unit is coated with a rust proof and corrosion-resistant gloss finish. Easily tighten the clamps using a Phillips or flat-head screwdriver. For Duct Sizes: 4" | Material: Stainless Steel | Pieces Per Pack: 2.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

FUNCTION - The 3/4" x 3/4" NPT brass fitting is an adapter for connecting two NPT female threaded pipes. DURABLE - As a solid and sturdy material, brass is perfect for hose systems as it can withstand long periods of wear and tear. THREAD - High quality and deep threads allow the fittings to bite better, not easy to slip. MEDIUM - This pipe fitting can…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

XFITTING HOT AND COLD PEX BALL VALVE Compatible with all types and brands of PEX Tubing - Watts, Everhot, Viega, Zurn, Nibco, Bow, etc. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Designed for hydronic heating as well as potable water distribution. 400 PSI. Approved to…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Flexible Coupling Compatible with cast iron, plastic, copper, lead, and steel piping. Flexible Connectors are Leak-Proof, Rot-Proof and Sealed Against Infiltration and Exfiltration. May be used for non-pressure drain, waste, and vent (DWV) piping systems and sewer systems indoors and outdoors. Conforms to ASTM C1173, CSA B602, Certified and UPC Approved…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🚜 Hydraulic Equipment

ALL-IN-ONE SET: CO-Z's 230-piece grease fitting set includes twelve types of the most commonly used SAE and metric grease fittings to feed lubricant to your bearings and other mechanical devices without need for disassembly; their varying sizes and head angles suit diverse needs. STRAIGHT & ANGLED FITTINGS: Perfect for automotive and industrial use…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Designed for installation on potable water lines to reduce high inlet pressure to a lower outlet pressure. Integral strainer makes this device most suitable for residential and commercial water systems that require frequent cleaning of sediment and debris. Direct acting integral by-pass design prevents buildup of excessive system pressure caused by…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🚜 Hydraulic Equipment

S0504B000.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🚜 Hydraulic Equipment

For installing fixtures after the siding has been applied to the home. Provides level surface for all exterior accessories. Dimensions: 6.75 In. x 6.75 In. For use on 4"-10" siding, Sold as 2-Pack. Made in the USA.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Tee with three openings for connecting and branching three pipes. Female NPT threads for connecting to male threaded pipes. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Operating temperature range of -65 to +250 degrees F. Meets ASTM B584 standards for quality assurance and ASME/ASMI B16 technical…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Product Type:Valve. Item Package Weight:0.02 Kilograms. Item Package Dimension:1.0 cm L X4.0 cm W X4.0 cm H. Country Of Origin: United States.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

One piece construction. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. Barbed edges provide positive connection. Excellent vibration resistance. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Adapter for connecting hose or fittings of different types. Connects to hose on one end and a male GHT threaded connection on the other. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Packaging Includes:3 Brass Hose Mender with barb 3/8" x 3/8"(10mm), 6 Stainless steel pipe clamps fit hose outer diameter of 13-19 mm. Material: Hose barb splicer mender made of brass. Pipe clamps all components are all made of 304 stainless steel and will not rust. Solid Connections:The hose barb can be solid connected to the hose(Fit hose witch inner…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Relative softness of brass threading when compared to other metals allows for a tight seal. Barbed shank provides secure connection to hose. Temperature range from -32 to +140 degrees F. Intended for use with hose clamp or crimp type ferrule (sold…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🚜 Hydraulic Equipment

[Functions] Great ZCONIEY up down switch remote controller replacement for dump trailer, dump truck, lift gate, lift dump, elevator lifter, stackers truck, etc. Powered by 12 volts DC. [Wide Applications] Fits most single-acting / double-acting hydraulic pumps power units including MTE, Monarch, Bucher Dyna-Jack, SPX, KTI, Bosch and others. [Strong and…