🪚 Industrial Drill Bits

3 Review

🔪 Cutting Tools, 🪚 Industrial Drill Bits

Specifications: Drilling dia.: 20mm; shank size: 7mm; drilling depth: 48mm; total length: 79mm. Round shank, cemented carbide cutter and solid hardened steel body. Applications: Can be used for drilling holes on wood and plastic products, furniture, door hinge. Used on cutting wood, plywood, solid wood boards, MDF, plastics, fiberglass etc. Forstner…

3 Review

🔪 Cutting Tools, 🪚 Industrial Drill Bits

Specification: Cutting edge diameter (CED): 0.8mm; cutting edge length: 10mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.). Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience. Spiral Flute Bits: Tip spiral…

3 Review

🔪 Cutting Tools, 🪚 Industrial Drill Bits

Designed for impact drivers. Drill and tap holes in one application. Deburr and countersink in one step. Speed tip for quick penetration.

3 Review

🔪 Cutting Tools, 🪚 Industrial Drill Bits

The parabolic flute design improves chip Ejection in metal and wood drilling applications. This product meets customer requirement. Product is easy to use.

3 Review

🔪 Cutting Tools, 🪚 Industrial Drill Bits

High Strength Alloy: The copper pipe swaging drill bit features the high-strength high-speed alloy. Compatible Bit: The copper pipe swaging drill bit is simple and easy to use, which can be directly connected to the electric drill interface. Time Saving: The copper pipe swaging drill bit is efficient and fast, which saves more time, compare with manual…

3 Review

🔪 Cutting Tools, 🪚 Industrial Drill Bits

For precise drilling and positioning of handles on doors, flaps and drawer fronts. Cuts the hardware install time by 80%. Jig is made of virtually indestructible aluminum and ABS plastic. Reversible for quick drilling. It is useful for many other applications as well.

3 Review

🔪 Cutting Tools, 🪚 Industrial Drill Bits

Size: 19mm(3/4”) diameter cutting bit,12mm(1/2”) shank and 150mm(5.9”) length. High speed stainless steel is designed to ensure sharp and fast execution in any material for clean results. Premium Heat treated black oxide is durable and withstand heavy duty operation for a long tool life. Black Oxide Surface Treatment holds up better lubrication for…

3 Review

🔪 Cutting Tools, 🪚 Industrial Drill Bits

INCLUDES: 7 Piece Split Ring Stop Collar Set (Assorted Sizes) and (1) Allen Wrench to tighten stops. FEATURES: Marked sizes for easy bit identification and optimal workflow; Plus a split ring design that allows accurate control of depth for the hole to be drilled, making these drill bit depth stop collars ideal for professionals and DIY enthusiast doing…

3 Review

🔪 Cutting Tools, 🪚 Industrial Drill Bits

Best tools on the market today to pre-drill for the head shank and threads of screws. Proudly made in the USA by W L Fuller. Includes 3/8-Inch cutting diameters in the most popular sizes #6, #8, and #10. Designed to cut clean and hardened for long wear. Assures best possible holding power and the tightest fit

3 Review

🔪 Cutting Tools, 🪚 Industrial Drill Bits

Designed for perfectly smooth, flat-bottomed and splinter-free holes, even in end-grain and through knots. Ideal for drilling decorative holes for fine woodworking and hinge boring. Chrome-steel alloy construction allows the bits to withstand high temperatures during drilling, reducing the risk of burning. Brad point centers bit for easy positioning of…

3 Review

🔪 Cutting Tools, 🪚 Industrial Drill Bits

Drill the pilot hole and countersink or counter-bore for screws in one step. The 1/4" hex shank can be used with power drills and quick-change chucks. Countersink to drive the head of the screw flush with or slightly below the surface. Four piece set includes bits for drilling pilot holes for screw sizes #6, #8, #10, and #12. Very convenient to change…

3 Review

🔪 Cutting Tools, 🪚 Industrial Drill Bits

Manufacturer: Greenlee. Country of manufacture: China. Power Cutting & Sawing.

3 Review

🔪 Cutting Tools, 🪚 Industrial Drill Bits

The drill depth stop bit is made of stainless steel, which is hard and durable. Suit for high carbon steel drills, and positively locks anywhere along the bit. Suitable for processing thin iron plate, thin aluminum products / copper, wood, plastic and other materials. Ranging from 3mm to 16mm , these drill bits are sure to help you out whenever you need…

3 Review

🔪 Cutting Tools, 🪚 Industrial Drill Bits

High Speed Steel tool - 16.5mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance. Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Black Oxide Finish - Black oxide…

3 Review

🔪 Cutting Tools, 🪚 Industrial Drill Bits

【Size】:From 2/5 to 2 Inch(Metric 10-50mm),2/5'', 8/17'', 19/32", 5/8", 45/64", 25/32", 55/64", 1", 1-1/41", 1-1/10'', 1-3/16", 1-3/8", 1-4/7'', 1-3/5'', 2". 【Material 】:Carbon steel (45% carbon content),hardened head, being hot-treated,high hardness,impact resistance for fast and flawless cutting.These bits are ground from a solid piece of metal instead…

3 Review

🔪 Cutting Tools, 🪚 Industrial Drill Bits

Cutting edge quickly cuts through wood with maximum efficiency. Thick edge quickly and easily cuts through nails. Screw point pulls bit through material for faster drilling. Engineered with wide flutes for faster chip removal. For drilling holes in wood and nail embedded wood.

3 Review

🔪 Cutting Tools, 🪚 Industrial Drill Bits

1. Nice tools for home repair and improvement.Perfect for DIY Wood-working Carving, Engraving, Drilling . Good quality material,and neatly processed drill tip enable to work smooth and clean.Smart round box make an easy job to take drill in and out.Good work for happy family!. 2.11pcs wood drill,brad point drill set. 3.Size…

3 Review

🔪 Cutting Tools, 🪚 Industrial Drill Bits

【Premium Material】-Classic HSS construction with titanium coating for capability and durability. The cutting edge of these drill bits are hardened and honed for sharpness, chatter-free design with staggered cutting teeth ensures precise countersinking and hole smooth clean. 【Reduce Friction】-2 Flutes form helps clear chips and debris away from the drill…

3 Review

🔪 Cutting Tools, 🪚 Industrial Drill Bits

Compatible with these TR Industrial Demolition Hammers accepting TR-One shank: TR-100 Series (TR89100, TR89105) and TR-300 Series (TR89300, TR89305, TR89307). This bit does not fit Makita, Milwaukee, Bosch, Dewalt or Hitachi hammers. Cut asphalt and hard ground (not for use with concrete). Enhance your demolition and chiseling job with this asphalt…

3 Review

🔪 Cutting Tools, 🪚 Industrial Drill Bits

Designed for drilling granite and concrete. 5/8" thread fits on polishers/ grinders. Lasting for dozens of holes depending on materials. use wet or dry. recomended speed 3000- 6000 RPM.