🔧 Industrial Power Tools
3 Review
Powerful Hammer Breaker: Heavy duty, durable constructed jack hammer electric with 3600W power and 1800BPM. Strong core technology meets the most demanding applications. Dual Handle: This electric jack hammer has 360 degrees swivel front handle for all-round application. Comfortable rubber D-shaped grip rear handle and absorbs vibration to reduce…
Read more about this product
3 Review
High power 4 HP (maximum motor HP) 8,500 rpm motor of the angle grinder with overload protection provides higher operating speeds under load. Epoxy coated field and armature of the metal grinder provide long service life against abrasion from airborne debris. DEWALT angle grinder comes with a low-profile gearcase allowing for work in tight areas…
Read more about this product
3 Review
Powerful 7. 5 Amp Motor | great for drilling through concrete, wood, stucco, or mixing drywall mud, cement, or paint. Drill and hammer drill modes for Masonry, Concrete and Wood Applications. Variable speed: 0-2800 RPM | use slower speeds for mixing. Switch to high speeds for drilling into concrete!. 1/2" Metal Keyed chuck accepts large diameter bits…
Read more about this product
3 Review
KEYLESS CHUCK- This drill comes equipped with a 3/8” keyless chuck for fast and convenient bit and driver installation or removal. Simply twist the chuck ring either direction to loosen or tighten the grip and insert or remove the bit. CARRYING CASE- The entire kit comes in a hard-plastic case with carrying handle. Each driver and bit fits into its own…
Read more about this product
3 Review
Brand New in box. The product ships with all relevant accessories.
3 Review
AWARD: Rated the Pro Preferred Nailer for 7 years running (2014 - 2020) by Builder and Developer Magazine. FASTENERS: 15-gauge nails from 1-1/4-in Up to 2-1/2-in In length. APPLICATIONS: Ideal for installing crown and base moldings, window and door casings, chair rails, cabinets, exterior trim and staircases. TRIGGER: Easily switch from either…
Read more about this product
3 Review
Powerful Cordless Drill: 525 in-lbs high torque, strong 1/2" chuck, sturdy drill body with weight balanced design. 2-Speed & 20+1 Clutch: 2 variable speed (0-400RPM & 0-1600rpm) and 20 + 1 torque clutch provide precise torque control for driving screws or drilling into wood, plastic, ceramic and metal. 1/2" All-Metal Chuck: compare with 3/8" small drill…
Read more about this product
3 Review
DEWALT cordless framing nailer has dual-speed motor optimized to drive a wide range of fasteners for versatility. Framing nailer gun has tool-free selector switch for sequential or bump-fire modes. Tool-free depth adjustment for precise nail placement. Stall release lever to reset driver blade in the event of a jam. Adjustable rafter hook. Easy access…
Read more about this product
3 Review
Perfect for upholstery, woodworking, trim work, vinyl installation and more. Shoot 3/8-inch crown staples ranging from 1/4 to 9/16 inches in length. Features an adjustable 360-degree air exhaust and a 1/4 inch NPT air inlet fitting. Compact 1.8-pound design features an extended nose for tight areas and corners. Spacious magazine holds up to 100…
Read more about this product
3 Review
➤【Applicable】Suitable for Major brands 4.5"/ 5" angle grinder such as Bosch, Makita ,Dewalt, Kress, Milwaukee etc. ➤【Brush ring】Grinder dust shroud has a Brush ring on the edge, which can effectively prevent dust from running away. ➤【Removable edge】Removable edge piece allows surface work flush to other. ➤【4 Size Clamping Washer】39mm, 42mm, 45mm, 48mm…
Read more about this product
3 Review
FASTENERS: Accepts 16° +/- 1 wire coil nails from 1-3/4-in - 3-1/2-in. AWARD: Rated the Pro Preferred Nailer for 7 years running (2014 - 2020) by Builder and Developer Magazine. WARRANTY: Covered by Metabo HPT's Professional 5-Year Tool Warranty. DEPTH ADJUSTMENT: Tool-less depth of drive dial adjusts for flush fastening in varying materials. TRIGGER…
Read more about this product
3 Review
Drives 7/16-inch crown staples from 1-2inch in length. Best for floor sheathing, lathing, fencing and roof deck. Lightweight and compact construction. Operating Pressure: 80 - 120 (PSI). Comfort grip reduces vibration fatigue. 360-degree adjustable exhaust. Air Consumption: 5.4 (SCFM).
3 Review
LAST SEEN feature of DEWALT 20V hammer drill helps reduce wasted time and money by providing the street address of where your premium hammerdrill was last in range of your Tool Connect-enabled device. Easily and quickly assign the cordless hammer drill to jobsites and users on the Tool Connect Inventory Manager software, increasing accountability and…
Read more about this product
3 Review
【Professional Household Tool Set】This compact tool kit contains Electric Screwdrivers, Claw Hammer, Wrenches, Screwdrivers, Pliers and many other tools that allow you to create DIY manual ideas without any scruples.If you have any question, please feel free to contact us at the first time. 【Power Tools Combo Kit With 16.8V Cordless Drill】18-speed…
Read more about this product
3 Review
Concrete Demolition and Rock Breaking has never been EASIER! 3 Easy Steps to use: Drill, Mix, Pour. Amazing 18,000 PSI expansive strength when mixed with water. Cracks according to drilling patterns. Dexpan breaks Reinforced Concrete & Rock WITHOUT Noise, Vibration! SILENT Controlled Demolition. Hundreds Job photos! Alternative to demolition jack hammer…
Read more about this product
3 Review
Ideal for limited space applications. Very low noise level: only 71 dB(A). Includes 1/8" and 3mm collets along with a silencer hose. Includes silencer hose. Quiet and lightweight.
3 Review
Country Of Origin: China. Model Number: 9512. Item Package Dimension: 6.3385826707" L x 2.8346456664" W x 1.7322834628" H. Item Package Weight: 1.0 lb.
3 Review
Durable, high-precision grinding stones. 5 piece assortment delivers versatility. Pair with your Ingersoll Rand Die Grinder for best results. Item Package Dimension: 7.5" L x 4.0" W x 1.0" H.
3 Review
105 DEGREE DESIGN: good for tight spaces, extends the power of a cordless screwdriver. BUILT-IN MAGNETIC SOCKET: holds standard hex drilling and drive bits, avoid falling. 1/4" HEX SHANK: can be quickly changed for drills, drive chucks and wrenches. 3-in-1 Set: a 105 Degree Right Angle Drill Attachment a 105 Degree 1/4 Inch Right Angle Drill Hex Shank…
Read more about this product