🔧 Linear Motion Products
3 Review
[SCREW DIAMETER]: 8mm Lead of thread: 8mm. [COMPATIBLE WITH]: Prusa i3 3D Printer. [LEAD SCREW LENGTH]: 295mm. [SCREW SPACING]: 2mm. [SERVICE COMMITMENTS]: We offer 1 YEAR Money Back Warranty. If you unsatisfied with the quality of our product, you can contact us with your complaints and 100% get your money back.
3 Review
100%brand and new. Suitable for 3D printer T8 lead screw. Lead screw diameter: 8mm. Pitch:2mm. Lead:8mm.
3 Review
Heavy duty linear actuator with 4 inch travel. 225 lb max static load; 112 lb max dynamic load. Overall Length: 9" (Min) to 13"(Max); Length Between Mounting Holes: 8.25" (Min) to 12.25"(Max). Perfect for operating tonneau covers, motorized trunks & hoods, amp racks and whatever else you may imagine! We have actuator wiring/switch kits.
3 Review
Rail Guide Surface technology: Oxidation prevention by electroplating (chromium plating). Slide Rail Block: MGN12H ball bearing carriage. Block material: Stainless Steel. Blocks are pre-loaded. Muti-using: Made of Bearing Steel with low friction coefficients Used in devices for the manufacture of semiconductors, printed circuit boards, IC packages…
Read more about this product
3 Review
★IMPROVE EFFICIENCY AND SAVE ENERGY in your devices. ★GREAT FOR YOU to replace the damaged Ball Bearings. ★SMOOTH MOVING,low friction,high rigidity and long life. ★ECONOMICAL,easy to maintain replace. ★WIDELY USED in home appliances,industrial,low noise and high speed electric motors,construction machinery, automotive components,pumps,and machinery.
3 Review
Upgrade or DIY Lead Screw, it is a necessary part for printer which lead screw is 8mm, pitch 2mm. Tips: please measure your own rod length before ordered.The Teflon coating will increase a little bit thickness. If the bearing installation will not get stuck, you need to use sandpaper to sand off the Teflon coating at the position where the bearing is…
Read more about this product
3 Review
high service life time due to low friction; low operation noise. no stick-slip effect, heats up less, reduced drive power required. high static and dynamic stiffness. high and more accurate positioning. high axial forces per Ball Screw volumina.
3 Review
Upgrade Rod for your printer or DIY your own printer. The Teflon coating will increase a little bit thickness. If the bearing installation will not get stuck, you need to use sandpaper to sand off the Teflon coating at the position where the bearing is connected, so that the bearing can be installed. Rod/ Lead Screw Main Material: Made of Stainless steel…
Read more about this product
3 Review
Upgrade or DIY Rod, it is a necessary part for CR10 CR10S printer. Tips: please measure your own rod length before ordered. The Teflon coating will increase a little bit thickness. If the bearing installation will not get stuck, you need to use sandpaper to sand off the Teflon coating at the position where the bearing is connected, so that the bearing…
Read more about this product
3 Review
Upgrade or DIY Lead Screw, it is a necessary part for your printer which lead screw is 8mm, pitch 2mm. The Teflo coating will increase a little bit thickness. If the bearing installation will not get stuck, you just need to use sandpaper to sand off the Teflo coating at the position where the bearing is connected, so that the bearing can be installed…
Read more about this product
3 Review
Material: Made of high quality aluminum alloy, sturdy and durable. Specification: Stroke Length = 250mm(10"); Retracted length: 14.13"(359mm); Extended length: 24.13"(613mm); Travel speed = 12 mm/s; Maximum current draw = 4.6 Amps; Maximum Dynamic Load = 225 lbs (900N). Low noise: silent and stable, make sound lower than 50db, suitable for many…
Read more about this product
3 Review
Material: Made of high quality aluminum alloy, sturdy and durable. Specification: Stroke Length = 100mm(4"); Retracted length: 8.13"(205mm); Extended length: 12.13"(305mm); Travel speed = 12 mm/s; Maximum current draw = 4.6 Amps; Maximum Dynamic Load = 225 lbs (900N). Low noise: silent and stable, make sound lower than 50db, suitable for many situations…
Read more about this product
3 Review
Minimum installation distance: stroke + 175mm. Fast Speed: 4mm/s, Load Capacity: 6000N/1280LBS. Operation Temperature: -25 ~ +65 celsius degree. Made of Aluminum Alloy for Durable Use, Noise decibel: less than 48dB. High quality metal material, silver, metal body, dustproof seal, waterproof, waterproof high performance motor, built-in stroke switch, can…
Read more about this product
3 Review
DUAL-CHANNEL - Connect up to 2x electric actuators with potentiometer feedback to have them travel in parallel, sequence, or individually. SYNCHRONIZE - Connect devices with potentiometers to synchronize their movements. SAVE UP TO 3 PRESETS - Use the wired remote to save 3x preset locations. COMPATIBILITY - With a current rating of 15A, this control…
Read more about this product
3 Review
Model: mgn12c, Length: 300mm. Slide is attached and can slide smoothly. Mini Petite, convenient to put in and out. If you need special length, feel free to ask us. Application to CNC parts, 3d printer parts, semiconductor manufacturing equipment, printed circuit boards, IC assembly equipment, medical equipment, robot arms, and other small linear motion…
Read more about this product
3 Review
304 Stainless steel lead screw + Brass Nut. T8 brass nut, with 4 holes to fix to the machine. Lead Screw Length - 600mm, Lead Screw diameter - 8mm, Lead Screw spacing - 2mm. Suitable for 3D Printer, stepper motor, machine tools, and other equipment. Enjoy a smooth&worry-free return service within a month. Any questions feel free to contact us.
3 Review
✅High strength aluminum extrusion. ✅Ideal for 3D printer and CNC build. ✅High-quality and service.
3 Review
400mm MGN12 linear rail guide with MGN12H block. Suggested to use M3 T nut and screws if you fix it to 20 series EU Al-profile. High Quality:Made of Bearing Steel with low friction coefficients.It worked great and had no resistance in the bearings when put on a rail.And it works beautifully for both slider motion as well as panning. Widely Use:Applied…
Read more about this product
3 Review
Made from carbon steel (1045), rigid and wear-resistant. The surface has been Nickel Plated for anti-rust purpose, brighter than ordinary linear bearings. Both ends have seals, and internal retainer is made from synthetic resin, so do not use it at more than 80 degrees. Size: bore 8mm, OD 15mm ( tolerance 0 to -0.011mm ), length 17mm ( tolerance 0 to…
Read more about this product
3 Review
High- speed motor - an ideal tubular actuator that offers high speed motion that can be used to simplify your equipment’s design while reducing energy costs. The compact design was developed to fulfil the market requirements for a low built-in dimension and at the same time a long stroke length. Advantages – has a different stroke sizes. Speed up to…
Read more about this product