🖥️. Single Board Computers
6 Review
Raspberry Pi *Not* included. Perfect miniature display for Model A+ or B+. Light soldering required for GPIO header. Great example code at Adafruit. Includes 4 programmable buttons
6 Review
This RAB plate holder is widely compatible with not only Raspberry Pi 4 Model B, Raspberry Pi 3B+/3B/2B/B+ but also Arduino Uno, Mega2560, also support both 400 points breadboard and 830 points breadboard. Access to all consumer ports: TF cards, HDMI and USB cords, very convenient for your DIY porjects. Portable, easy to move, carry, this RAB holder is…
Read more about this product
6 Review
Featured here is a single case that can be configured for different applications. It is compatible with Raspberry Pi 4 Model B. This is just a case, Raspberry Pi Board is NOT INCLUDED. Can be mounted to flat surfaces, DIN rails, or to any object via zip ties. Cases can be stacked to form clusters of single board computers. Supports 25*25mm fans from 5mm…
Read more about this product
6 Review
Fully US Regulated Power Supply Adapter. Center or Tip is positive, sleeve is negative. Automatically converts international voltages, up to 1A output. Compatibility with: Arduino UNO R3 Mega 2560 1280, Arduino CCTV. Works with devices require 9V and 1000mA of DC power and physically fits the plug. Please make sure the connector size 5.5x2.1mm can fit…
Read more about this product
6 Review
Small formed cooling Argon Pi 4 case that especially keeps the Raspberry Pi 4 safe from harm while still being easy to hold and carry anywhere and everywhere. The Argon NEO case supports all available Raspberry Pi 4 Model B boards including the Raspberry Pi 4 Boards with 8GB RAM, especially with its easy assembly. The Raspberry Pi 4 Case is designed to…
Read more about this product
6 Review
This single-board computer is capable of many of the things your desktop PC does, like spreadsheets, word processing and playing high-definition video and games. It can run several flavors of Linux and is being used to teach kids all over the world how to program. The Raspberry Pi 3 A+ is here and, like the Raspberry Pi 3 Model B+, it boasts a 64-bit…
Read more about this product
6 Review
The LCD has always been a device that acts as a window in human-computer interaction. For example, the prompt window on some instrument devices, the temperature and humidity prompt box, the device running status monitor, and the prompt screen of the counting device all have LCD figures. The common LCD1602, LCD2004, and LCD12864 are fabricated using…
Read more about this product
6 Review
BBC Micro:bit Development Board V2 is included! New micro:bit with sound. Battery holder with On-Off switch to power the micro bit which is very convenient for controlling. Micro:BIT is a great platform to start, you code visually with blocks and that prevents a lot of naive syntax errors. Technical Support: Connection Diagram, Sample Code, Using Method…
Read more about this product
6 Review
8-50mm C-Mount Zoom Lens For Raspberry Pi HQ Camera. 8-50mm Adjustable Focal Length, Flexible Photo Composition At Your Will. Raspberry Pi, and HQ Camera in the photos are NOT included. To use with Raspberry Pi Zero, you need to buy an additional Raspberry Pi Zero v1.3 Camera Cable
6 Review
The 160-degree wide-angle lens can capture a large area of the scene within a short shooting distance and is suitable for photographing large scenes such as architecture and scenery. This camera module is designed for NVIDIA Jetson Nano Board and Raspberry PI CM3. The camera is capable of 3280 x 2464 pixel static images, and also supports 1080p @ 30fps…
Read more about this product
6 Review
This is a very beautiful screw terminal expansion version, which is expanded for the pins of the Raspberry Pi. It is convenient for everyone to connect when doing electronic experiments. There is the pin out information of the GPIO pin on the top of the terminal and on the side. The status information of the pin is displayed. When the GPIO pin is…
Read more about this product
6 Review
Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B. PoE (Power Over Ethernet) capability,IEEE 802.3af/at-compliant. Fully isolated switched-mode power supply (SMPS). While providing stable power for the Raspberry Pi, there's also a USB-A port for powering extra external device. Onboard high speed active cooling fan, better heat…
Read more about this product
6 Review
165 dBm sensitivity, 10 Hz updates, 66 channels. Built in Real Time Clock (RTC) - slot in a CR1220 backup battery for 7-years or more of timekeeping even if the Raspberry Pi is off!. Internal patch antenna which works quite well when used outdoors + u.FL connector for external active antenna for when used indoors or in locations without a clear sky view…
Read more about this product
6 Review
Fresh Design: A fresh Arducam design to extend your camera vision on the Raspberry Pi Camera Module V2 – peel off the sensor from the connector on the camera board and put our cable in between. It does NOT support 5MP V1 cameras or any other sensors. Fresh Look: Give your Raspberry Pi Camera Module V2 a fresh look by freeing the sensor from the camera…
Read more about this product
6 Review
Compatible with Raspberry Pi Zero W. Super-slimline profile. The Raspberry Pi Zero Case has been designed to fit both the Pi Zero and the Pi Zero W. The case consists of two parts. It has a standard base featuring a cut-out to allow access to the GPIO, and a choice of three lids: a plain lid, a GPIO lid (allowing access to the GPIO from above), and a…
Read more about this product
6 Review
Two Ways of Placing: With one stand, this case will show you two ways of placing in vertical or horizontal direction. Better Heat Dissipation Effect: With a large 40mm quite cooling fan, it can drop the temps for your Pi. Include 4PCS raspberry pi heatsinks, it will be better cooling experience. Access to Most Ports: It can be access to USB-C power port…
Read more about this product
6 Review
This relay module is 5V active low. Relay output maximum contact is AC250V 10A and DC30V 10A. Standard interface can be directly connected with microcontrollers. Working status indicator lights are conducive to the safe use. 4-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as AVR, PIC, ARM, PLC…
Read more about this product
6 Review
The Digispark is an Attiny85 based microcontroller development board similar to the line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE the Digispark is a great way to jump into electronics, or perfect for when an Arduino is too big or too much…
Read more about this product
6 Review
This module has a smaller size. It is more compact and saves space for your project. This board contains 11 digital input / output pins, all pins have interrupt / pwm / I2C / 1-wire and a micro USB connection. This board is 100% compatible with Arduino and WeMos and can be programmed in the Arduino IDE. WIFI development board, with 4 MB of flash memory.