Newest Bushing Tool Releases
Replacing worn or damaged bushings is an essential part of maintaining and repairing suspension systems. New bushing tool releases allow automotive technicians and DIY mechanics to remove and install bushings quickly and easily. Keeping up with the latest bushing tools can save time and frustration in the workshop.
Extractors
Bushing extractors grip onto the old bushing and provide the leverage needed to pull it out of its housing. New extractor designs like the OrionMotorTech 9-Way Slide Hammer Puller set allow for extracting bushings in tight spaces. This versatile kit includes nine different puller heads to fit multiple bushing sizes and locations.
Installers
Once the old bushing is removed, a bushing installer tool is used to press the new bushing evenly into place without damage. New bushing installer sets like the 8-Ton Hydraulic Ball Joint Press Kit have adapters to fit all common bushings. The hydraulic press applies smooth controlled pressure for easy installation.
Lubrication
Bushing lubricants make installation easier and extend the life of the bushing. New advanced formulas like the Super Lube Silicone Lubricating Compound provide high temperature protection while preventing squeaking and sticking.
Cutters
Removing old collapsed rubber bushings can be difficult without damaging the housing. New bushing cutters like the Orion 9-Piece Bushing Cutter Set slice through bonded rubber quickly. Anti-slip TPR handles provide comfort and control while cutting.
Burnishers
Bushing burnishers use a abrasive stone to remove rust and roughen the surface in the bushing housing. This allows the new bushing to adhere properly. New spring-loaded burnishers like the OTC 4579 Spring Loaded Bushing Tool apply consistent pressure for fast surface prep.
Brands to Watch
- Orion Motor Tech - extractor kits, cutters, and installers
- OTC Tools - bushings tools specialized for European vehicles
- Astro Pneumatic - affordable quality bushing tools
- Lang Tools - extensive specialty bushing tool range
Upgrading to the latest bushing tools makes servicing suspension systems much less tedious. DIY mechanics should consider adding a basic bushing tool kit from Orion, Astro, or OTC to their garage. Professional techs will appreciate the time savings of new hydraulic bushing presses and cutters.
Top Bushing Tools for Automotive Repair Shops
Worn out suspension bushings lead to poor handling, wheel misalignment, and unsafe vehicles. Automotive repair shops need quality bushing tools to remove and install bushings efficiently. Here are some of the top bushing tools every shop should have.
Hydraulic Bushing Presses
A hydraulic bushing press allows precise, controlled installation of new bushings. Presses like the OTC 4575 20-Ton Press can handle bushings up to 5 inches in diameter. Features like a remote pump allow working in tight spaces.
Mechanical Bushing Presses
Manual mechanical bushing presses provide affordable bushing installation. The OrionMotorTech 9-Ton press handles most common bushings with threaded adapters. A threaded ram makes operation smooth and easy.
Bushing Driver Sets
Bushing driver sets have stepped adapters to fit various bushing sizes during installation. The Astro 1447 46-Piece Driver Set handles most domestic and import cars. Organized cases keep components together and tidy.
Bushing Extractor Sets
Extractor sets grip onto old bushings securely for removal. The OTC 4579 9-Way Slide Hammer Puller Set provides versatility for front and rear bushings. Slider hammers generate high force when needed.
Bushing Cutters
Specially designed bushing cutters slice through rubber for removal. The OrionMotorTech Bushing Cutter Set makes quick work of bonded or collapsed bushings. Anti-slip handles provide control.
Bushing Lubricants
Lubricating new bushings makes installation easier and extends bushing life. The Permatex 133AR Ultra Slick Assembly Lube won't wash away or attract dirt.
Top products in 🔧 Bushing Tools
8 Review
8 Review
Bushing Burnishing Tools
Abrasive burnishers clean and roughen bushing housings for proper adhesion. The OTC 4583 Fixed Blade Burnisher quickly preps the housing surface.
| Tool | Price Range |
|---|---|
| Hydraulic Bushing Press | $250-$1000 |
| Mechanical Bushing Press | $100-$250 |
| Bushing Driver Set | $100-$300 |
| Bushing Extractor Set | $100-$350 |
| Bushing Cutter Set | $50-$150 |
| Bushing Lubricant | $5-$20 |
| Bushing Burnisher | $50-$150 |
Investing in quality bushing tools improves shop productivity and keeps customers happy. Prioritize hydraulic and mechanical presses, then add specialty tools over time.
DIY Bushing Tool Kits - Everything You Need to Get Started
Replacing worn suspension bushings is a common DIY repair to improve steering, handling, and ride quality. With the right bushing tools, you can remove and install new bushings easily in your own garage.
The Basics
At a minimum, you'll need an extractor to remove the old bushing and an installer to press in the new one. Add some lubricant to make the job easier. A starter kit such as the Orion Motor Tech 9-Way Slide Hammer Puller Kit provides all the basics.
Includes:
- Slide hammer puller
- 5 lb and 7 lb slide hammers
- 9 installing and extracting heads
- Bushing installer cone
- Tube of lubricant
Another interesting products
Typical Repair Example
Let's look at how you could use this kit to replace the lower control arm bushing on a Honda Civic. This is a common bushing that deteriorates and causes steering wheel vibration.
- Raise and support the vehicle safely
- Loosen the lower control arm pivot bolts, but don't remove
- Select the 35mm extractor head and attach to the slide hammer
- Thread the extractor into the old bushing and tighten
- Work the slide hammer back and forth to pull out the bushing
- Clean the empty bushing housing thoroughly
- Lubricate the new bushing and align in the housing
- Place the installer cone in the press and use bolts to press in the new bushing evenly
- Reinstall the control arm and tighten the pivot bolts to spec
Expanding Your Kit
Once you gain some experience, add some specialty bushing tools to increase your capabilities.
Nice Upgrades:
- Hydraulic press for easier bushing installation
- Bushing cutters to slice out bonded rubber
- A bushing burnisher to prep housings
- Larger extractor heads for big truck bushings
Taking on suspension bushing jobs will save you money and give you confidence as a DIY mechanic. An affordable starter kit combined with some upgrades will handle most common bushing repairs.
Choosing the Right Bushing Tool for Your Vehicle
When worn suspension bushings need replacing, having the right bushing tools makes the job much easier. Choosing bushing tools that fit your specific vehicle ensures efficient repairs.
Domestic vs Import
Domestic bushings on American cars are mostly standard SAE sizes. Import vehicles use metric bushings that require different tools. Mixed kits like the OrionMaster 8-Way Slide Hammer Puller work on both domestic and import bushings.
Car vs Truck
Cars generally use small bushings up to 1 inch in diameter. Trucks and SUVs often have large bushings over 2 inches. Look for bushing tools with range like the OTC (4579) 9-Way Slide Hammer Puller Set that covers both sizes.
Year/Make/Model
Certain years or models have unique bushing designs. Checking service manuals will give you exact sizes. For example, 1990s GM trucks need specific bushing driver adapters.
Location
The bushing location on the vehicle determines which specialized tools are needed. For instance, rear suspension bushings may require angled extractors to reach.
Stuck Bushings
Collapsed or bonded in bushings can be difficult to remove. In those cases, extras like bushing cutting scissors from OrionMotorTech can sliced away the rubber.
DIY vs Shop Tools
DIY mechanics can start with basic sledgehammer puller sets from Astro Pneumatic. Professional techs need workshop grade tools like high-power hydraulic presses.
With the huge variety of bushing tools available, taking time to choose the right ones for your specific vehicle saves frustration. Manufacturers like OTC provide fitment guides online to assist in selecting tools.
Bushing Tools to Make Suspension Repairs Easier
Worn out suspension bushings are a common issue on high-mileage vehicles. Fortunately, having the right bushing tools makes this repair job much more manageable for DIY mechanics and professional techs alike.
Bushing Presses
A quality bushing press is essential to install bushings without damaging them. Presses like the OTC 4579 20-Ton Hydraulic Press provide smooth, even pressure via a hydraulic cylinder and ram.
For home garages, a more affordable mechanical screw press like the Astro 1442 works well. The key is using the correct sized press adapters to fit the bushing.
Extractors
Extractor tools firmly grip the old bushing so it can be pulled out. Slide hammer pullers are very effective, using jolts from hammering to pop out stuck bushings.
For example, the OrionMaster 8-Way Slide Hammer Puller Set has tapered screws to bite into the bushing rubber for a tight hold during removal.
Lubricants
Greasing the new bushing and housing makes pressing it in much easier. Use a special bushing lubricant like the Permatex Ultra Slick Assembly Lube that won't wash away quickly or attract dirt.
Cutters
If a damaged bushing has collapsed inward or bonded to the housing, using bushing scissors is the best way to remove it. The OrionMaster 16-Piece Bushing Cutter Set makes removal fast.
Burnishing Tools
Once the old bushing is out, a burnishing tool cleans and roughens up the housing surface for optimal adhesion with the new bushing. The Astro Pneumatic 784NB burnisher makes quick work of this step.
Real-World Example
Here's how bushing tools made replacing the rear trailing arm bushings on a Toyota Tacoma much simpler:
- A hydraulic press precisely installed the new bushings
- Bushing lubricant allowed the bushings to slide smoothly into place
- A slide hammer extractor pulled out the old stuck bushings
- Bushing scissors cut apart the bonded rubber
- The burnisher cleaned up the housing surface
Investing in quality bushing tools tailored to your vehicle's needs takes the hassle out of suspension bushing replacement. Both backyard mechanics and professional techs will appreciate how much faster bushing jobs go.
Replacing Worn Bushings? Don't Forget These Handy Tools
Replacing those clunky old bushings is made much easier with specialized tools. Here are some must-have bushing tools to add to your automotive toolkit.
Bushing Extractor
A slide hammer puller kit like the 8-way set from OrionMotorTech grips and extracts even the most stuck bushing. The tapered screw ends provide a tight grip, even on slimy old bushings.
Installer Cone
An installer tool presses in the new bushing evenly and straight. Conical installers like the Astro Pneumatic 1449 work well for most light duty bushings. Apply a bit of lube first.
Bushing Lubricant
Greasing up bushings before installation allows them to slip into place without damage. Permatex makes an excellent high-temp, low-friction lube perfect for bushings.
Cutters
If old bushings have hardened, cracked, or bonded inside the housing, you'll need bushing cutters. The OrionMaster cutter set makes quick work of slicing through tough rubber.
Burnishing Tool
A quick pass with an abrasive burnisher cleans out the housing and roughens the surface for bonding. The Astro 784NB works well for most bushings.
Real World Example
Here's how these tools helped when replacing the lower control arm bushings on a Ford Ranger:
- Lubricant allowed smooth installation of new bushings
- The installer cone pressed them in evenly
- Cutters sliced through the old cracked bushings
- The extractor yanked out the remaining pieces
- A quick burnishing prepped the housings
With the right bushing tools, DIY repairs go much quicker. Focus on good extractors, installers, lubricants, cutters, and burnishers.
How to use your Amazon Prime to buy Bushing Tools
Having the right bushing tools makes removing and installing new suspension bushings much easier. Luckily, Amazon Prime members can order high-quality bushing tools online and enjoy free fast shipping.
Find Reputable Brands
When searching Amazon for bushing tools, look for well-known automotive brands like OTC, Astro Pneumatic, and OrionMotorTech. Avoid generic or no-name tools that may be cheaply made.
Compare Features
Compare the different bushing tool models and read product descriptions carefully to choose the set with the right features for your needs. Look for versatile tools that work on a wide range of bushings and vehicles.
Read Reviews
Check Amazon customer reviews on potential bushing tool purchases. Look for sets that consistently get 4+ star ratings and positive feedback on ease of use and durability.
Find the Best Price
Amazon's prices on quality bushing tools from reputable brands are very competitive. Search for any available coupons or promotions to save even more. Avoid counterfeit tools that are priced too low.
Enjoy Fast Shipping
One major perk of Amazon Prime is getting free 2-day shipping on your bushing tool order. Have the tools delivered right to your door so you can start repairs immediately.
Try Before You Buy
Amazon's flexible return policies allow you to try out bushing tools and return them if they don't meet your needs. However, research carefully to avoid returns and unnecessary shipping.
Keep Your Garage Stocked
As you accumulate experience replacing bushings, take advantage of Amazon Prime's convenience to keep your automotive toolkit well stocked. Quickly order specialized bushing tools as needed.
By leveraging your Prime membership for auto parts like bushing tools, you can save both time and money on DIY repairs. Just remember to focus on quality when choosing tools to order.
Similar products
- Newest Bushing Tool Releases
- Extractors
- Installers
- Lubrication
- Cutters
- Burnishers
- Brands to Watch
- Top Bushing Tools for Automotive Repair Shops
- Hydraulic Bushing Presses
- Mechanical Bushing Presses
- Bushing Driver Sets
- Bushing Extractor Sets
- Bushing Cutters
- Bushing Lubricants
- Bushing Burnishing Tools
- DIY Bushing Tool Kits - Everything You Need to Get Started
- The Basics
- Includes:
- Typical Repair Example
- Expanding Your Kit
- Nice Upgrades:
- Choosing the Right Bushing Tool for Your Vehicle
- Domestic vs Import
- Car vs Truck
- Year/Make/Model
- Location
- Stuck Bushings
- DIY vs Shop Tools
- Bushing Tools to Make Suspension Repairs Easier
- Bushing Presses
- Extractors
- Lubricants
- Cutters
- Burnishing Tools
- Real-World Example
- Replacing Worn Bushings? Don't Forget These Handy Tools
- Bushing Extractor
- Installer Cone
- Bushing Lubricant
- Cutters
- Burnishing Tool
- Real World Example
- How to use your Amazon Prime to buy Bushing Tools
- Find Reputable Brands
- Compare Features
- Read Reviews
- Find the Best Price
- Enjoy Fast Shipping
- Try Before You Buy
- Keep Your Garage Stocked
