Review on Computer case Deepcool Matrexx 55 black by Wiktor Niemiec ᠌

Great model. In some things, the manufacturer made a compromise and savings, but still the product is of high quality. Pros: Side window made of tempered glass and the same glass on the front panel (non-removable). Deep, therefore suitable for high cooling systems (coolers). All holes inside the case have bent edges, so it’s quite difficult to get hurt. Multimode lighting. Convenient location of the power buttons, etc. (the contour of the power button is highlighted). Lots of room for wiring. Cons below: One disc tray dangles slightly on the skids, while the other lies motionless. The lower grid under the power supply is removed and fastened rather inconveniently. In the design of the most inexpensive black version of the case (without fans), there is no shroud for the power supply. If someone has a BP that is not of a noble black color, but everything else is more or less tanned, then it may look disharmonious, especially if you have a party with blackjack and light music inside. An additional leg (from the standard set of fasteners with the case) did not screw into one of the threaded holes for the m-atx motherboard. Something carved. By the way, as for the thread, all the screw holes at the back had sharp edges after drilling. These are the things that can hurt :)