Jack Pad Adapter Anodized Black Replacement For B-MW 135 335 535 E82 E88 E46 E90 E91 E92 E93 E38 E39 E60 E61 E63 E64 E65 E66 E70 E71 E89 X5 X6 X3 1M M3 M5 M6 F01 F02 F30 F10,Mini (3 Pcs) Review

I like these. They work well, fitting perfectly into the BMW's rubber jack ports. They're very solid aluminum, and although it's not important, they look really sharp. I bought four of them to use with jack stands. All my jack stands have cleats that will tear the rubber jack ports up over time. These pads convert those cleats to a flat surface, and distribute the load throughout the BMW's ports. In addition to the reduced wear on the ports, the car seems more solidly supported on these, and so

I had no idea that it would be complicated to use a floor jack on a BMW. First of all the car sits so low that I couldn't get my floor jack under the car. That was solved by driving the car onto a couple of 2x4s to increase the ground clearance to accommodate the jack. Then I discovered that the jack point on the car required a rectangular fixture. This solves that problem. It fits neatly into the jack point on the car and protects it from damage from the floor jack.

Did not know I needed this but yep, it fits in the BMW jack point rubber blocks perfectly. Non-slip grooves on underside keep it centered on the jack. Nice inexpensive upgrade, now I can’t miss. Recommend.

Haven’t used these yet, but they appear to be made of appropriate material and suitably dimensioned . The textured undersurface is a nice touch.

The quality of this adapter is excellent but it needs to be a little larger. The diameter is only 2 7/8 inches. If it were about 1 inch larger it would fit the jack pad underneath the car much better. The rectangular part of this adapter is sized correctly for my BMW.

When I started working on my BMW MINI Cooper, I didn’t know that specific jackpads were needed. I had damaged all but one of the plastic jacking points underneath my vehicle. After replacing them, I learned that I was supposed to use a proprietary jack pad to lift the vehicle. Thankfully, I was able to find them here. These jackpads fit perfectly into the rectangular mounting point under my vehicle, and do not slip.

Beautifully made, well finished, useful tool. At $6.25 a piece (when you buy the 4 pack) they can't be beat. I looked at many both on and off Walmart and some are cheaper (and made from urethane or even lesser inferior material) and some are considerably more expensive.These are CNC machined aluminum (billet and not cast) with an anodized black finish. If ya need them you can't go wrong buying these ones !

The adapter does not fit snugly into the rectagular slot, therefore care must be taken to ensure it's positioned correctly prior to lifting the vehicle with a jack. Not sure if the rectangular slot is intended (or tall enough) to contact the chassis to lift the car at that contact point or if the rounded portion of the adapter is supposed to contact the lip of the plastic slot and lift at that contact point. If the latter, then the use of this adapter is redundant as the jack pad does the same…

If you have a Mini Cooper, these adaptors may not be the best option without modification. The rectangular part is not tall enough to touch the top of the jack point so the weight is still on the edges of the jack point causing them to break. You need to add a 2mm thick piece of wood or rubber to the top of the rectangular piece to make it taller.

The current price from the auto tuner where I bought my first pair is $32.95 each. These are identical in quality, materials, appreance, etc. and a whopping savings of $52.90.

Great product. Glad I spent a little extra and opted for aluminum vs rubber pads. Work great with my Esco jack stands to hold up my 328xi BMW.

These are so close in design to the jack pad I had on hand from Burger Motorsports, a known provider of the highest quality BMW aftermarket and tuning parts available. They are the same size, weight, and material composition as the BMS unit.Unfortunately, they are completely useless and provide no better stability or protection of the factory jack points than jacking directly on them.They're so close to being great, especially when 3 of them cost the same $20 as 1 from Burger. You get what you…

This slots right into the jack holes in my E93. One word of caution: be sure to take them out when you jack your car down. They do stick in the hole, but they will fall off when you drive off. I found that out the hard way and had to buy a replacement.

I do a lot of work on my BMW in the driveway, on ramps and jack stands. The work frequently spans multiple days. When I can't use the ramps, I use jack stands at the jack points on the car. The fixed pads at the jack points were beginning to break down, so I got these jack pads to provide stability and protect the jack points. They work great, although it does take a little finesse to get them lined up while letting the car down onto the jack pads. Good purchase. Good product.

Great quality and fit for the latest G07/G05 X7,X5 SUV’s. They also fit my 2020 M Car exactly the same. Pretty much "a have to own” item for lifting your late model BMW. I purchased multiple to keep in each car. The aluminum works better with the plastic jack points and won’t leave a mark on the plastic jack points when done.

I didn't realize I needed this until I went to jack up my Mini Countryman to do some undercarriage work. Sure, you might get away without it a time or two, but, those plastic jack receiver points are going to crack and break if you don't use something like this. Since these are metal, I expect them to last a lifetime!

You need to be super careful because it wants to work it's way off the jack plate. They should've picked a different material for the jack side of the adapter. Used this on my BMWs and fit is perfect.

A must for German car owners who use floor service Jacks and Jack stands! There are really only four (4) spots to lift a car from without creating serious damage. I am going to buy a couple more so that I can leave one in the car in the event I should need to lift the car away from home. Really great value and saves money from body shop repairs!

Works as intended. 4 stars for the "set of 3” stupidity. Who does that nonsense anyway? Make it either 2 or 4, at least for as long as cars have 4 wheels. Stupid selling games that only annoy customers.

This unit requires the jacking pockets to be perfect and not marred or bent in anyway or they won't fit. Being plastic the chances of that being true are slim. If they made these just a few mm smaller they would be better, still good provided your plastic jack point isn't torn up.