Straight Mount. No instructions required. But the pressure regulator is nonsense. It leaks horribly and the gauge doesn't read psi. I'll fix it by replacing the pressure gauge. And the connecting hose is very thin. I will replace it too. Those minor issues aside, it's very portable, lightweight, and cuts very thin lines at a 2" angle with no effort at 110V. I can't wait to try thicker material at 220V. ***Update (helpful tip)***The second time I tried to use my plasma cutter it didn't work at all. After about 30 minutes of troubleshooting, I found that something was blocking the airflow inside the machine. Take the cover off and use a small piece of wire (bread ties) and pin it in front where everything connects. The air line in the car is clean, so I immediately saw what appeared to be a piece of crushed pebble (or something similar). I disconnected the line, blew out the debris and tested again. Now it works fine. Hope this helps if someone's car suddenly stops working and there is no airflow at the nozzle.
๐ฅ Whizzotech Solder Wire 60/40 Tin/Lead with Flux Rosin Core - 0.032 Inch Diameter for Electrical Soldering (4oz/100g/0.22lb)
13 Review
Hakko T18-BR02 Soldering Tip - T18 Series for Hakko FX-888/FX-8801 - Conical Shape - Bent 30 Degrees - R0.2 mm x 10.5 mm
12 Review
309LFC-O X .035 X 1LB Spool Gasless Stainless Steel Flux Core Welding Wire by Blue Demon
12 Review
Hakko 599B 02 Wire Type Soldering Cleaner
11 Review