Review on 🚽 Premium Stainless Steel Bidet Sprayer Kit for Self Cleaning - Reduce Toilet Paper Waste with Handheld Bathroom Hand Shower by Mirzet Gosselin

Easy to install. However, when I first tightened the whole thing, it leaked a little from the top of the T-knot. I took everything apart and next time I used the teflon tape that came with the kit and two washers at the top of the tee (where it connects to the bottom of the tank). The trick is to roll the teflon tape from the top, go around the pipe 3 times, and then finish the top, keeping the tape at the very top of the pipe (away from the end of the pipe that will screw into the T). -Pipe). Assembly). So when you start unscrewing the nut, there is no teflon tape on it. Also, I put the large washer in first, then the smaller washer on top, then drilled through the T-joint to the tank. I did this teflon trick on all the connections and got a leak free install. I also used adjustable pliers to tighten the T-knot as I have weak hands and felt I needed to make sure it was really secure. Be sure to tighten the plastic wing nut on the bottom of the tank as it will usually rotate and loosen as you tighten the T-socket. The jet is quite powerful when the handle is fully open, I achieved a soft jet by keeping the handle partially open. so that it does not splash and water does not splash everywhere. Hope this helps other people install it without leaks.