Review on 🔧 CNS Steering Gear Box Stabilizer Bar - Compatible/Replacement for 94-02 Dodge Ram 1500, 2500, 3500 (4x4) Gasoline and Diesel Models by Rashid Vaquera

Very nicely made set. The stabilizer is well constructed and very durable. The kit installed on my 1999 Dodge 2500 SLT (Diesel) in about 20 minutes. The biggest problem you may have is getting the socket low enough for the support post to be tightened. My impact bushing only fit about 3/4 of the nut, but it was enough to tighten it. The screw holes in the stabilizer are slotted well and alignment was trivial. Follow the instructions to install and tighten the mounting screws. The only thing that bothered me was that the grease fitting in the bearing housing was loose and I didn't realize it until I finished the installation and added some grease. The two small adjusting screws require Loctite and are difficult to tighten. I don't see their purpose either as the bearing can't pop out and neither can the rudder spindle. Most bolts have tightening torques, but not those in the truck frame that hold the bushings in place. Crap photo under the truck after installation. I left the truck on the ground to do it. This actually made installing the stabilizer easier as I was able to hold one end with my foot while inserting the screws into the other end.