Review on Wall mount ONKRON for TV 17"-43" tilt-swivel NP28, black by Adam Adam ᠌

Fastened in P44 to the air duct in the kitchen. There gypsum is 50-55 mm in total. I did not use native fasteners for walls from the bracket itself. I took fischer's 8x40 nylon dowels and simple 5x60 self-tapping screws for 100 / bucket. I put 5 dowels (4 along the edges and banged one into the center) - everything stands rigidly and firmly, you can pull yourself up. The main holes are drilled to size, do not break them. In concrete if fastened, native fasteners are quite authoritative. But there you always have to remember that for such a long fastener, you need to take a puncher and a good drill so that the holes are even. When you need to attach the plate to the TV, do not forget the plastic bushings there (they are included in the bracket kit), especially for TVs whose back surface is not flat - the bushings must be placed between the plate and the TV. The screws for the VESA itself are included in several sizes, just choose which ones fit your TV. I have 32" hanging on it, there is no weight there, it weighs 5-6 kilograms in total. In general, everything works without problems at any length, at any angle, within the adjustment range, everything works.