Review on 🔦 Command Outdoor Light Clips – 17017CLRAWVPES - 32 clips, 36 strips by Carron Goebel

Clamp breaks easily. The sticker keeps falling off. Constantly having to go back and fix it when it falls down. Sometimes one falls, then several fall. But you can't reset them safely. Sometimes when it falls off you try to put it back on and then when you move the LED chain the previous tape comes off. So if you've tried to fix one, you'll have to fix two or more! Sometimes you try to put it back on and it falls off immediately, in less than a minute. I tried to apply the sticker for more than a minute. It might help some, but it doesn't always work. Sometimes if you hold the sticker for a minute, peel off the blue backing and attach the clip, the LED string will fall off in less than a minute. You can usually tell it will fall off because the sticker will make a tearing sound. . That sound haunts me like, "Oh no, I hear it, it's peeling again!" It's always peeling off the side of the wall, not the side of the plastic clip. For every 1 clip you use for your LED, you need to install at least 2 clips. The plastic clip often breaks. The clip is large enough to fit very snugly around the LED string. The diameter should be 1 mm larger. But when the clip needs to be adjusted, it often breaks. Very thin! It is very difficult to peel off the blue part after sticking on the wall. Tip: Pull back the blue part a little, then put it back on, and then peel off the back of the wall sticker. When it is hung on the wall, the blue backing is easier to peel off. I wish I had a working clamp!