Review on 💻 Rosewill SRM-01B-450 Micro ATX Mini Tower PC Case with 450W Power Supply, Pre-Installed 80mm Fan, USB 3.0 by Nguyen Taylor

Inexpensive device with USB 3.0 ports and 2 fans, but there are a few limitations: 1. Cooling. Apparently, the front grille of the case has a perforation for the passage of air, and if it did, the cooling would be excellent. But no, all intake air is routed through a small opening on the underside of the faceplate that is just 1/4 inch above the surface. Inside, there are also large openings on the top and side of the front 120mm fan (air flows around and takes the path of least resistance), essentially rendering it useless. Both of the included fans are quiet, but low-power, low-airflow fans. I drilled holes in the lower grille area, opened the intake, put higher feet under the case, placed two 1.5" holes in the window next to the CPU heatsink and cardboard to create an air duct to pull out the front fan to force the air intake. If you are using this on a gaming rig I would also replace the rear 80mm fan with something more powerful and with all these mods you should get adequate cooling. build quality. The metal is nicely finished, but very thin, so the case cannot be roughly treated at all. The front panel just accidentally popped out when installing the components and also 2 of the 6 motherboard standoffs had already been removed at the base. Guess what to expect at this price.3. ?. The included USB 3.0, switch, and LED cables are long. insanely long. Not really a complaint, just a pain to get all the cables in order. In some cases there is an access hole under the MB CPU area so you can remove another panel and get under the radiator mounts, this is not just for your information. Overall not bad for the price if you're willing to put in some effort. to make it work. I'm also not sure why people are complaining about storage space as there are a lot of them.