Review on Robot vacuum cleaner Roborock S7 RU, black by Franciszka Zamska ᠌

It can only be operated through the internet when WiFi is present, and only through a mobile application. Both the vacuum cleaner itself and the mobile application connect to the same IP address, which is part of the subnet belonging to the Chinese company Kingsoft Corp. It would appear that the control is carried out through a server that is situated in China. Those. You will not be able to use the program to control the vacuum cleaner if there is no Internet or WiFi available, or if you are unable to connect to the Chinese server for whatever reason. During the process of cleaning, long hair is threaded onto both the main brush and the side brush. You will need to delete it manually in order to do so. It is possible to use scissors to trim the side brush. In the event that there is a significant amount of winding, you will initially be required to take out the side brush by unscrewing the screw holding it in place. In order to remove hair from the central brush, you will first need to pull it out (it will snap) and then remove the side bearings. With the assistance of a laser lidar, curtains can be recognized as an obstruction even when there is no direct physical touch. Those. When you are cleaning them, it is best to bring them up higher than the level of the lidar. He does not notice the big mirrors that extend all the way to the ground; instead, he depicts a reflection of the room in the mirror on the map, and he strives ceaselessly to penetrate the looking glass. On the map, it is required to manually block such mirrors with an artificial boundary. When the air within the apartment is extremely dry (for instance, in the winter, when the heating is switched on), the fine dust that settles on surfaces has the potential to become electrified and adhere to them so tenaciously that neither the side brush nor the main brush can remove it. In addition to this, it adheres to the exterior of the vacuum cleaner, which means that after cleaning, you will need to physically vacuum the vacuum cleaner itself, particularly after cleaning carpets. When wet cleaning, streaks frequently persist because the napkin itself picks up dirt during the process and, at some point, begins to simply smear it. This is why wet cleaning can leave streaks. When you try to drive the vacuum cleaner over a carpet that is thin, the carpet will crumple and shift when you drive over it. Before the actual cleaning can begin, all of the thin and little carpets need to be thoroughly vacuumed.