Review on Fractal FBA_FD CA NODE 202 BK Design Node 202 by Park Seo Jun ᠌

Pleased with the instructions. Everything was assembled according to the instructions, as in IKEA. Config: -MSI B450I GAMING PLUS AC -ID-COOLING IS-60 Basically, everything fit. It was difficult to lay the cables so that they do not interfere with the air, since the PSU is modular. But according to the characteristics and reviews, the cooler should have stood up perfectly, but clung to the fasteners of the dust filter above the processor. I had to bite off the fasteners on the dust collector itself, and sharpen the counterpart on the lid with a file. Otherwise, the cooler fan hit. Initially, I wanted to put it horizontally in a shelf, about 4 cm remained above the body. In this form, the processor suffocated, because the exhaust air was then again taken in for cooling. As a result, the idle temperature of the processor was 53-54°, ​​which caused noise from the fan. As a result, I put it in a vertical position under the table. The temperature in idle time is 43-44 °. The RX480 video card with two turntables under it does not suffocate. From the point of view of temperatures, it works a little worse than in a midi tower case.