Review on 🚗 12 inch 72W Spot Flood Combo LED Work Light Bar for Truck Car ATV SUV 4X4 Jeep Truck Driving Lamp (72W, Combo) by Willpower by Mike West

Great flashlight that has completely changed the brightness of my Honda ATV. I installed it on my rancher's grille, actually in the middle between the headlights. The light is bright, very white, creating a nice bright spot directly in front with much smaller light on the sides, top and bottom. It lights up the entire front of the quad very neatly when I need LOTS of LIGHT. I hooked it up to the existing bright light switch on the handlebars so I didn't need an extra switch. There were two problems that could be considered disadvantages. How do you attach this thing? It has two screws protruding from the bracket. If your quad has holes for them where you want to mount the light, great. not mine. The closure is adjustable, which is very convenient. I solved the problem with a drill and longer screws. Not difficult, but not trivial either. Adjusting the illumination angle is also troublesome. You have 4 screws and one is difficult to reach. So loosening, adjusting, tightening just isn't easy. I installed mine and now consider it permanent. When installing this light, keep in mind that you will need additional parts. Light wire, maybe 12 inches long. I needed lots of 14ga black and red wires, zip ties, wire splices, relays, battery connectors and a fuse. Additional services cost me about $15. Drilling the round bumper tube wasn't much fun, but my biggest problem was finding the damn wire for the light switch. I actually found it as soon as I took the switch apart, but the bad splice fooled me. Lost a lot of time here.