I bought the SC20M2540JN model (the one in the main photo), unlike the others, it has control on the handle. The vacuum cleaner is good, before that there was a similar model, I would buy it again, but it is no longer produced. The main requirements were power, cyclone filter, control on the handle, all this is present here. Very convenient cord winding system, you press the carrying handle and it is wound up. The handle-cyclone and cyclone-tube connections were a little upset, it was well conceived, you insert it according to the arrow until it clicks, the latch snaps into place and that's it, but there is a slight backlash, the lower brush is simply pulled on the pipe and there is no such problem with it. The bag in the kit is reusable, since I prefer paper ones, I decided to try it on from an old vacuum cleaner and they fit like family, I will attach a photo of the box. Handle control is well implemented, an on-off button and two power change buttons. The control module itself is not physically connected to the vacuum cleaner, most likely an infrared port, so there are 2 batteries. There is also an on-off button on the body of the vacuum cleaner, if the batteries in the remote control run out, you can use it. In general, the vacuum cleaner is good, but it will be seen later, I take off one star for the backlash in the joints.
NANPU 3/8" NPT Compressed Air Filter Regulator Combo Piggyback, 5 Micron Brass Element, Poly Bowl, Semi-Auto Drain, Metal Bracket, 0-150 Psi Gauge
26 Review
NANPU 1/2" NPT Air Drying System - 5 Micron Particulate Filter, 0.01 Micron Coalescing Filter, Air Pressure Regulator Combo - Semi-Auto Drain, Poly Bowl W/Metal Gauge
23 Review
NANPU 1 FRL Air Filter Regulator Lubricator Combo With 0-150 Psi Gauge, 5 Micron Brass Element, Poly Bowl & Semi-Auto Drain - Metal Bracket Included
20 Review