Review on Firestone 2158 Command System Standard Duty by Darth Calder

I have a 2013 F-150. This compressor is great. It inflates bags quicker than I expected (<8 seconds from 0 to 30 lbs). Everything is very high quality, from the compressor to the clutches. I am very happy with it and would buy it again. As for the installation - it was my first and I'm a perfectionist. I wanted to install it under the hood on the passenger side above the wheel arch. I made a bracket to line up the existing compressor mounting bolts. I didn't want to drill new holes anywhere so I made a different mount for the dial and shifter and used the existing screws on the dash under the steering wheel. I can't easily see the sensor while driving, but I'm happy with it. There's enough space between my boots and the sensor that I don't think I'll kick it, but there can be a bit of dirt from time to time. There are a lot of wires so I shortened and spliced the wires (it could have been twisted but it looked sloppy). There was plenty of tubing too, I have a good 6ft or more left. Going the anal grip route took 6 hours. If I had to do it a second time, maybe 2 hours. I've spent a lot of time playing around with this mount; and argued for an hour where I should assemble everything. Routing the cables and air hose was fairly quick and easy. Round 2 will be significantly faster. Finally, I didn't connect the light sensors. That might be nice, but I didn't want to start testing wires that were "lighted wires" to figure out what to connect them to. I'm good with dark scales.