Review on 📐 Dimensionally Accurate Orange Filament Printer by Dmitriy Kingsley

GRAY Bought on a great deal (under $12/spool). Did a front drum brake mount for my bike, will post how it performs. Here is the crucial information for its production. I wanted to smooth it out to reinforce the structure and eliminate the need for rough sanding. Filament: NOVAMAKER ABS 1.75mm GRAY Printer: Custom 3D Printer 600x600 Slicer: Simplify 3D Nozzle Diameter 1.0 Extruder Multiplier: 0.82 Extruder Width: 0.8 Retract Distance: 1.2 Vertical Retract Stroke: 2.0 Retract Speed: 4500 Layer Height: 0.3 Top Layers: 5 Bottom Layers: 5 Perimeter: 5 Infill: WiggleInterior Infill Percentage: 28% (parallel to clamp) Infill Overlap: 25% Infill Width: 100% Hot End Temp: (Layer/Temp) 1/232, 2nd /234, 3/236, 4 /238, 5/240 Layer Temperature: 85 Default Print Speed: 3200 mm/m (53.3 mm/s) Reduced Outline Speed: 0.45 Reduced Fill Speed: 0.70 Reduced Substructure Speed: 0 .70 X/Y Traverse Speed: 4800 mm/m (80 mm/s) Z Traverse Speed: 800 mm/m (13.3 mm/s) Outer Thin Wall Type: Perimeter Only Internal Thin Wall Type: Allow Gap Fill Allow Perimeter Overlap: 28 % ACETONE IRONING STEAM: (no heat) 1 hour -15 minutes COLOUR: RUSTOLEUM_Dark Steel+Clear Gloss