High-Quality 1.75Mm Light Orange PLA 3D Printer Filament By HATCHBOX - 1 KG Spool With +/- 0.03 Mm Dimensional Accuracy For Exceptional 3D Printing Filament Results Review

Note: I print for both hobby and commercial purposes. My review is more pertaining to commercial use, however.I used to buy eSun PLA+ Cool White for all my white printing - especially the refills which were very nicely priced, with the added value of not having to throw away spools that I was done with. eSun has since stopped keeping the refills in stock, and the price of the same filament with the spool as well as availability issues behooved me to look elsewhere at the time. The eSun PLA+ has

The Qidi X-Maker is an excellent printer for 3D printing noobs like me. I didn't want something that I had to assemble for fear that I wouldn't do it quite right, and the Qidi comes very well packaged and is fully assembled. Compared to most other 3D printers, which are quite plain looking, the X-Maker is also quite an attractive printer with it's metallic red housing. Of course looks don't matter if the printer doesn't perform, and the Qidi prints very well. I especially like the magnetic…

I actually had to buy a different companies purple because this was so pink. It does print well though! Great job on that aspect.

I used the manufacturer supplied sample with my printer of their high end PLA and my prints went great. Bought the cheapest PLA I could find on revain, and my prints started looking terrible. I went through troubleshooting for EVERYTHING, but what topped it off was a customer needed the MSDS for what I was using and the cheapo brand couldn't provide it. I saw Hatchbox had great reviews and a MSDS easily available, so I switched.Immediately my prints were back to good quality! I'll keep buying…

Hatchbox PLA is one of the best mid-tier filaments out there. In my book the cost vs. quality is hard to beat. As with any filament, once you have the temperature tuned in the prints come out looking nice and uniform. Hatchbox also seems to have a superior drying before packaging process because I never have problems using a sealed reel when printing unlike some other brands.While this review is specifically for the black filament, I have been just as happy with 9-10 other colors I have used…

Filament worked fine. revain asked me to rate the sheerness so I will add some description for those whom prefer their filament more on the thin side. First of all the dimensions are quite adequate. At no point was it lacking in its shape. Secondly it had no problem laying on the bed. I would watch it twirl around the print head before spreading on the bed sheet, mesmerized by its performance. Night after night it would travel across the bed to fulfill my desires, and in the morning it would…

New to 3D printing. BUT not new to failed prints. also not new to absolute garbage coming out of my Dremel 3D20. My printer is an old one and the lowest of the low. I had a lot of issues due to the lack of a heating plate, and the filaments if came with. I even then went and bought different filaments often not much better luck. After going to Resin printing and realizing it had its own issues. I needed to print and broke out the Dremel again. But got new filament, this filament. I will always…

Pros:- Prints come out really excellent- It is very well spooled. This sounds weird but compared to other brands I've gotten where it's kind of randomly wrapped around, this is perfectly spooled. I'm not worried at all about it getting stuckCons:- Unlike other brands (such as OVERTURE) the spool does not have a hole/window on the side to see how much filament you have left. This is the reason why I give it 4 stars.- When I first used this filament it would clog every time. Now, to be fair, for…

When I first jumped into this hobby, a friend of mine suggested Hatchbox as a quality filament for both price and material. After hundreds of hours of printing and fine tuning my printer, this filament continues to perform, and is even better as I tune my printer in.The tricky thing with reviewing filament and some of these bad reviews is people are quick to blame the filament, when it could be something wrong with their printer settings. Or if they are normally using one brand and switch to a…

After experimenting with many of the alternatives, I finally came to the realization that Hatchbox was worth the small amount of extra money. This review is for the white color which printed flawlessly with a rich, creamy texture and sharp lines. Compared to the two earlier white PLAs we used, CCTree and Creality's own, the Hatchbox looks and prints much better. Just looking at the finished prints, the difference is quite starkly obvious. I have ended my search for the best PLA as a result.

Took a chance with this filament and I am so pleased. Prints wonderfully and adheres to the printing surface like crazy. I run a 48c bed with a 205c head temp and it prints perfectly on my A20T and my CR10.

Might be because of have a strange addiction to it or me being too lazy to look for different filament but this stuff has done a pretty good job so far. It has a pretty decent shelf life too.

This has a beautiful deep red color to it and the print quality while using it was excellent. Good adhesion and smooth finish.

I honestly don’t know if the other reviewers got a bad batch or something, but my spool prints just fine. I was afraid to try this filament due to the reviews, but I needed the color and 3D Solutech (my main filament brand) was sold out.

I’ve used several PLAs since purchasing my Creality Ender 3v2 and none have performed as well as the Hatchbox product. In fact, the only criticism i could make is the spool is plastic. I’ve found other companies who used recycled cardboard and i thought that was a really nice touch. Perhaps Hatchbox will do the same some day.

I've tried different brands, but Hatchbox has been the only brand that gives me clean prints with my Ender 3. The filament is sturdy and great value. I use my printer mostly for cookie cutters, and it's hard to find a good PLA material. Highly recommend this one . I've purchased 5 different colors from amazon and they have all been great.

Apparently, this spool is #1 in revains' best seller list. I have had my 3D printer for almost 1 month (ZERO EXPERIENCE with 3D printing. it IS a learning curve), purchased this spool at the same time, you know, planning ahead. For someone completely NEW to 3D printing like I was a month ago. my first two days were a NIGHTMARE. It takes a while to get your printer dialed in. I will say, I have been running this spool nearly every day on a little MonoPrice V2. There are ZERO issues with this…

Been using Hatchbox for more than 2 years now, and can say nothing but good things about it. Very easy to use, and hadn’t had any complications at all. Highest rated Fdm printer Filament out there.

There are some mixed reviews, people complaining about winding or whatever. Personally, I've had no issues at all. I ran it a little toward the high end of the heat range, and it's going great (about halfway through the spool). I've since ordered additional colors.

I really enjoy using this filament and have had great success printing with it until my most recent roll. I had read in other reviews that others were having issues with it tangling on the spool. I personally had never had the issue until my most recent roll. Every time I start a print I have to babysit it to help get the tangle out of the roll. I just bought an Ender 3 S1 and obviously with a new printer I am going to be careful with everything until it gets broke in and I get used to the way…