Review on Vetroo MESH6 Gaming Case - 6X ARGB Fans, Mesh Front & Tempered Glass Panel, Mid Tower ATX For Optimal PC Cooling by Terry Kohl

The front glass, while attractive, kills your cooling. The filter on the front bottom is a double filter.I removed both and replaced it with a lighter PVC mesh. There is a slight awkwardness to the 2 level seating of the original parts, so further modification may be wanted.The front fan works well, but it only uses a molex connector. On/off/color/pattern are all controlled with one side button. If you want to switch out the front fan, this button disconnects from the fan into a standard power or reset button, so it can still be useful.I opted for Noctua fans. I chose an A-series for the front and an S-series for the rear. I have no cooling issues. Airgoo had some neat LED strips that I used in place of the glowing fan, which used marngets to form and hold the strip. Works very well.I'll add a picture when I can, but my M-ATX board had some sizing issues.the main PCI slot was 'lowered' on the board in favor of an M.2. This forced me to use the 'lowest' ports on the case. The secondary PCI slot has no area for an external ports, this has to be used for something internally with some MoBos.