Review on Cooler Master MasterBox NR200P Mini ITX Computer Case - Tempered Glass Side Panel by Wiktor Janusz ᠌

Bought for a future with an external video card 3080 Aurus gaming box. This limited the choice of their cases, 3.5-4 slots water cooling stupidly will not fit anywhere. It didn’t fit into this case either with a riser or when connected directly. From the second time I bought a 15 mm cooler slim and replaced the 25 mm cooler, it literally fit back to back. Now I'm waiting with Ali for an adapter to the pins of the video card to connect the cooling. Standard thick 3-4 pins on all turntables can only be connected to the motherboard. The case cannot be called ITH, it is quite large and at the same time there is no possibility to install MicroATX mothers, just add 1 cm there and there is no need to overpay for expensive ITH boards. And with a video card, I would not suffer so much. And so, in addition to 2 dropsy vidyuhi slots, there is a place for 2 dropsy slots per cent. Now there is 1 slot. Desirable sfx bp with detachable cables in this case. I put flex atx bp from an external video card onto harnesses, it's enough for me. Under my specific assembly with great difficulty came up. Under normal video cards, it will fit without problems, even through the riser, even directly. It's just that if someone collectively farms an egpu on dropsy, this is the smallest building where, with reservations, it will fit. Look at the photo. Don't even consider it less.