Review on 🚿 Grohe 46174000 MetalFlex Hose for Kitchen Faucet, 59-Inch, Chrome by Keith Bradley

Exactly as described. Installs in less than 10 minutes. To remove the old hose, turn off the hot and cold water supplies under the sink. Disconnect the hose and remove the quick coupler and spring. Pull the spray head and hose out upwards, disconnect the hose from the spray head. Apply a small amount of petroleum jelly to the o-ring before installing it on the spray head for quick and easy attachment to the hose. It comes with two different ends to attach to the atomizer head. Make sure you are using the correct one for your device. You will need to slip the end onto the hose and hand tighten to check. If there is play or slippage, try the other end. You then want to apply a small amount of petroleum jelly two to three inches to the other end of the hose and run it through the bracket. Place the return spring on the hose from underneath and install the quick coupler, use a wrench to hold the end of the hose and hand tighten the coupler ONLY, DO NOT OVERTIGHTEN THE CONNECTION. Put the sleeve on the tube.