Review on 💨 Maximize Cooling Efficiency: FRACTAL DESIGN Meshify Airflow Tempered Case by Mateusz Wysokiski ᠌
Fits the description completely, very satisfying.
In my case, there are 2 pieces of Noctua NF P14s redux–1200 for blowing from above, for blowing on the bottom of Noctua NF–A15 + Be Quiet! SILENT WINGS 3 140MM front. On the processor - Noctua NH-U14S. All this is a miracle in the aggregate: - provides completely silent operation without load, up to 35 degrees on the processor, up to 40 on the video card; - almost silent (650 rpm for exhaust, 700 for pull-in) operation with a processor load of no more than 60 degrees (6600K at 4.5 GHz); - barely audible work in a complex load (such as igors) - 850 for retractable, 900 for exhaust, 1200 rpm for video. In this case, the vidyakh does not go beyond 61 degrees. And this is with the set grids. If you take it off it will be even better. In general, you can safely take.
- 1. Everything is done and thought out very sensibly; wherever necessary - ties, holes, hooks. Everything can be laid very, very neatly and beautifully. 2. Very compact for a miniATX tower. The MSI 1080 fits right in. 3. You can change the CPU cooler without removing the mother from the backplate, there is a hole in the back. 4. Anti-dust mesh available in front, bottom and back. The lower one is removed from the front, the body does not need to be dragged and turned over to remove it. The top is magnetic. 5. Intake fans can be supplied 4 x 120 or 3 x 140. 6. Exhaust fans can be placed 2 x 140 at the top and 1 x 120 at the back. 7. 1 (one) diode that combines the indication of power and disk activity, barely noticeable. Located in front, behind the mesh. Blue. 8. Soft spacers are placed between the side glass and the body. Vertical - on the glass, horizontal - on the case. Through this, the glass is adjacent to the body without any gaps at all. 9. All fans allow some variability in the location in the seat, because they are fixed to the case not through holes, but through long slots. In other words, there is a maneuver of a few centimeters up and down (right-left).
- 1. Super inconvenient location of the Reset button, top left. I pressed it every time I had to remove the front mesh. Turned it off. 2. Two, total two USB ports on the front. Just swine. Although both 3.0. 3. Very thin iron. It seems that the motherboard serves as one of the stiffeners. In the Define Mini (feels like), the pieces of iron were a third thicker. 4. Grids greatly interfere with air intake and exhaust. When removing the front mesh, it gets -4 degrees, when removing the top - another -3. But this does not mean that everything is bad with cooling. Just the opposite.
New products
Comments (0)
Top products in 🎒 Computer Cases
Computer case Deepcool Matrexx 55 black
55 Review
Fractal Design Node 304 - Black - Mini Cube Compact Computer Case - Small Form Factor - Mini ITX – mITX - Enhanced Airflow - Modular Interior - Includes 3x Fractal Design Silent R2 120mm Fans - USB 3.0
42 Review
Computer case Deepcool Matrexx 55 MESH black
64 Review
Fractal Design Define R5 - ATX Mid Tower Computer Case - High Airflow and Silent Optimized - Includes 2x Dynamix GP-14 140mm Silent Fans - Water-Cooling Ready - Black
43 Review
Another interesting products
BEHRINGER UM2 Audio Interface with XLR/TRS, 1/4", USB, and RCA – Black, 1-Channel
62 Review
Enhanced Sound Blaster Play! 4 Hi-res USB-C DAC and Sound Adapter with VoiceDetect Auto Mic Mute/Unmute, Dual Noise Cancellation, Bass Boost, Dynamic EQs | Ideal for Windows PC Video Calls
13 Review
Enhance Your Audio Experience with the Creative 70SB181000000 Sound Blaster X3 Digital Audio Converter - Black
13 Review
External sound card BEHRINGER U-CONTROL UCA222
16 Review