Pros
- Quality, equipment. Case ventilation.
Cons
- The price with all truths and not truths came out at 7400r. in dns under 10, in Regard about ~ 8600 (I do not remember exactly). Cloth for gl , after two months I wiped the gl and stains .
💨 Maximize Cooling Efficiency: FRACTAL DESIGN Meshify Airflow Tempered Case Review
10
·
Very good
Rating
4.4
🎒 Computer Cases
Media
(4)
Photos by authors
(12)
Details
| Brand | Fractal Design |
|---|---|
| Color | Black |
| Material | Alloy Steel |
| Cooling Method | Water, Air |
| Motherboard Compatability | ATX |
| Item Weight | 6.5 Kilograms |
| See 4 more | |
Description of 💨 Maximize Cooling Efficiency: FRACTAL DESIGN Meshify Airflow Tempered Case
Streamlined high-airflow design. Angular mesh front panel maximizes air intake. Tinted tempered glass side panel. Two preinstalled Fractal Design Dynamic X2 GP-12 120 mm fans deliver optimum airflow with minimal noise. Easy-to-clean filters on the front, top, and base. Sturdy steel drive trays. A compact yet spacious open Micro ATX layout creates an unrestricted airflow path from front intakes directly through key components to exhaust, ensuring heat is never an issue
Pros
- I will leave my few words about this case. The airflow was fine with me. But if we turn to professional tests, the temperatures in this case, relative to other cases, are not the most competitive. Of course, the small size of the FRACTAL DESIGN Meshify Mini C case also matters, so if you're looking for record-breaking temperatures and better blowing performance, it might be worth looking into other cases. At the same time, I am more than satisfied with the temperatures, namely my components. The i7 11700f processor, with the kraken m22 single-section dropsy installed, reaches 48-57 degrees in games, depending on the project. Video card RX5600xt warms up to 65 degrees. I'm very satisfied with these scores. It all depends on what components you have and what numbers will be comfortable for your soul. The operation of the case does not cause any problems, all the details are quite well thought out and if there are any nuances, they are very minor and I can easily get used to them. I am very satisfied with the purchase.
Pros
- - Maximum compactness and functionality (It was very critical with the height of the case, but at the same time I wanted to fit the rx 5700 xt and 140 valves to reduce noise) - Strict and stylish design pleases the eye - Tinted tempered glass looks great - Intuitive cable management - Good soundproofing - Excellent breathability - Removable filters at the bottom, front and top without moving the housing - Native valves are quite efficient and silent
Cons
- - Expensive, of course, but worth it in my opinion
Pros
- 1. Everything is done and thought out very sensibly; wherever necessary - ties, holes, hooks. Everything can be laid very, very neatly and beautifully. 2. Very compact for a miniATX tower. The MSI 1080 fits right in. 3. You can change the CPU cooler without removing the mother from the backplate, there is a hole in the back. 4. Anti-dust mesh available in front, bottom and back. The lower one is removed from the front, the body does not need to be dragged and turned over to remove it. The top is magnetic. 5. Intake fans can be supplied 4 x 120 or 3 x 140. 6. Exhaust fans can be placed 2 x 140 at the top and 1 x 120 at the back. 7. 1 (one) diode that combines the indication of power and disk activity, barely noticeable. Located in front, behind the mesh. Blue. 8. Soft spacers are placed between the side glass and the body. Vertical - on the glass, horizontal - on the case. Through this, the glass is adjacent to the body without any gaps at all. 9. All fans allow some variability in the location in the seat, because they are fixed to the case not through holes, but through long slots. In other words, there is a maneuver of a few centimeters up and down (right-left).
Cons
- 1. Super inconvenient location of the Reset button, top left. I pressed it every time I had to remove the front mesh. Turned it off. 2. Two, total two USB ports on the front. Just swine. Although both 3.0. 3. Very thin iron. It seems that the motherboard serves as one of the stiffeners. In the Define Mini (feels like), the pieces of iron were a third thicker. 4. Grids greatly interfere with air intake and exhaust. When removing the front mesh, it gets -4 degrees, when removing the top - another -3. But this does not mean that everything is bad with cooling. Just the opposite.
Pros
- In fact, the advantages of this case is not so much. 1. Good ventilation (with reservations) 2. Compactness 3. Cable management is no better or worse than models in this price segment. He is normal. Familiar, let's say, for a case in this price segment.
Cons
- Perhaps my subjective judgments, but, no matter how strange it may sound, the case is painfully compact inside. Yes, it is designed only for mATX motherboards, but can't systems built on mATX be productive? If you assemble a bunch of components with an "above average" level in this case, it becomes crowded inside. No. VERY tight. And all of its (body) "perforation" already ceases to be such a clear advantage. Air cooling towers fit far from everything that is critical for productive, but very hot modern processors. Installing "nedovodyanki" also causes difficulties. Everything depends on the length of the video card. Those. it is no longer possible to choose "what you want", you need to constantly look at the dimensions. If you put the heatsink on the top grill, it may be difficult to be compatible with the "body kit" (radiators and other trims-decorations of power circuits) of the motherboard. In any case, "stick" something more or less productive will not work. ing "whatever, if only it fits" does not give much profit in comparison with those CPU air cooling towers that fit here. What prevented the Swedes from designing an extra 5 centimeters in length - I don’t know. It would not have affected the appearance much, but it would have added profit noticeably. I’m not talking about such “little things” as thin, no, the thinnest metal, the shortness of the front panel by connectors (only 2 usb ports in 2022, well, that’s all). This has been said by others in their reviews.
Pros
- 1. Really high-quality assembled case 2. Looks solid, and at the same time not boring. Suitable for both gaming and office PC 3. The kit has everything you need to organize the space 4. For such sizes - very roomy
Cons
- 1. Perhaps my expectations were too high, but the turntables in the kit are noisy - I replaced them with my own. 2. There are no filters on the back panel (at least not in mine) 3. The top mesh does not handle dust as effectively as the front - a filter layer with a finer mesh (as on the front panel) would not hurt
Pros
- handsome Well made Add. space for fans / cooling system A lot of bolts, ties - all beautifully packaged
Cons
- Narrow in width - when choosing a processor cooling, I selected the tower in height and was worried that it would not fit When removing the front panel (otherwise do not clean the front filter), there is a danger of tearing off the wires going to the button / light bulb / usb Glass lid - broke after 2 months when climbed inside (see comment)
Pros
- Mesh front panel in the corners maximizes air intake
Cons
- Some issues
