Review on Mount ONKRON G160 for two monitors 13"-32" desktop, 2 x 8 kg, gas lift, black by Mateusz Kazana ᠌

Great bracket for the price. I took it to install a laptop and an external monitor to it. The platform for the laptop had to be purchased separately. The photo shows the lowest position to which you can lower the laptop on the platform. The paw does not fall below. I don’t know why here in the comments they swear at cable channels. I didn't have any problems. I put hdmi from the monitor to the laptop, power and usb. No problem. It is tightened with two hex keys. Very simple. This bracket is not suitable if you plan to move monitors frequently. Paws firmly hold and extremely not pliable. That is, you can not just move the monitor up. It will move up and to the left (if you look at how I have it installed) in an arc. You can’t move it to the right or left at all while holding onto the monitor, you need to climb back and the brothers by the paw and adjust it. The monitor can be rotated on the arm (portrait/landscape). The description does not say, but the bracket has two ways of attaching to the table. Behind the table (like a clamp) and through the table (if the table is large, you can drill a hole in the table top and pull it from below). Installation takes 5 seconds. If you want the monitor to be flush with the edge of the table and the mounting point, then keep in mind that at the back (between the table and the wall) you may need space for the elbow of the bracket (see photo). My table is very narrow, but there is a distance to the wall, so it suited me well. Otherwise, the monitor would rest on the eyes) In short, if you are not going to juggle monitors, then take it boldly.