Review on 📦 Stalwart Organizer Container with Mounting and Removable Features by Dakota Afzalian

I assembled my unit in about 45 minutes. The instruction page (only 1 page, a construction sketch) is very minimal. All parts were included and none of the baskets were damaged. everything is safe There was some surface damage to the bottom shelf, probably due to bumps during shipping. At first I thought the 3 horizontal rear shelf brackets were missing, but after some searching I found them hidden in the top shelf cover for shipping. panic averted. There were 3 sets of mounting screws in the device bag. All three bags contained spare extras. The LONGEST of these (without nuts or lock washers) are used to attach the uprights to the base and a vertical brace to the horizontal shelf uprights. Do the vertical bracket last. LOCK WASHER machine screws are used to attach the diagonal braces to the two vertical ends. Horizontal racks attach to the uprights with one machine screw and nut per hole. I strongly recommend two things: 1) Despite the temptation of speed, don't use a drill to install nuts and bolts. Use your fingers, a screwdriver, and a socket wrench. Bolts and nuts are difficult to assemble and easily loosened and/or overtightened. This will tear them off easily like others have done with power tools. 2) DO NOT tighten screws until they are all in place. release her Once they are all connected and properly installed you can hand tighten them.