Review on 🔌 WAKOODA Electric Pump Valve Stem: Fast Inflation with Torque Tabs & Halkey Roberts H3 Valves by Michael Glassburn

Every ISSU owner should have this connector. Previous pumps I've used have required you to manually hold the unthreaded tubing in my paddle boards while pumping, which means you have to hold the tubing at all times to keep it from loosening. This allows you to connect any pump with a Schreader connection and let the board inflate without child supervision. Just plug it in, turn on the pump (i.e. set the pressure in psi) and then let the pump work. Tip: If you're using a supercharged pump (which you need to inflate your board to over 5psi) and it's not a 2-phase pump, you'll need to use a regular non-compressor pump or the manual hand pump that comes with it your board just to get the board to the point where it takes shape. Compressor pumps are great for inflating things to high PSI levels, but they are very slow and most people trying to pump boards from scratch using ONLY the compressor pump wait over 20 minutes. Cut more than half of that time by simply pressurizing the board to 1psi for it to take shape, which is actually very simple; getting it from 3psi to 15psi (or whatever your board calls for) which is the hardest and most tedious part so let the compressor pump do that part. Much luck!