Review on 🚽 Valterra E1003VP EZ Valve 3-inch Electric Waste Valve System, Black - Enhanced for SEO by Kyle Collins

Received the valve today, unpacked it and found a very solid valve and motor with a very strong power cord. There are two unconnected terminals, these are the two terminals that go to the circuit breaker and since the device is DC powered it doesn't matter which terminal the terminals are connected to. Connections are omitted to facilitate panel assembly and two connections are made later. I would recommend taking pictures of the wire connections at the switch for future reference. UPDATE: We installed and wired the valve and it works great. . The most difficult thing is to attach the valve with gaskets so that it does not leak. We put some tape around the bottom of the drain and my wife pulled on it just enough to push the sections apart so I could insert the valve and install the gaskets properly. Installing the valve took about 20 minutes, with most of the time being spent removing and reinstalling the oil pan cover. We look forward to many years of easy blackwater drainage. I may also replace the greywater valve in the future, but the non-push-pull works quite simply. The black water valve sucked from the start. Cheap valve. UPDATE: We already installed the valve and just did a nearly 11,000 mile cross country ride and the valve worked perfectly. Very convenient, no need to pull the T-handle of the valve to drain the water from the tank. I highly recommend the valve. It worked great.