The product is easy to install. I had a problem unscrewing native nuts. I used a ton of WD-40 and broke a 3/8" drive breaker, a regular 3/8" drive head and a 3/8" drive adapter. I was able to take them off by 1/2 inch. an operating impact head and a 1/2 inch breaking bar with a long tube attached for leverage. Don't be a fool like me and try 3/8 inch powered tools. Go to Harbor Freight and get a 1/2 inch disc if you don't have one. If you have the right size pry bar and can put a pipe on it it will work, but I've had eye nuts that didn't come from the factory 3/4" but were 18mm so that screwed me up a bit.