Review on Mount Arm Media LCD-T22 black by Adam Walendzik ᠌

unfortunately, there was not enough load capacity for the old 22" monitor - the monitor turned out to be heavier than it is written in the recommendation. Different pros: Quality workmanship and materials. Does not backlash anything. Fixing the tilt of the monitor in the vertical plane and rotation in the plane of the screen clearly works. Attaching the monitor to the bracket is as easy as shelling pears - there are bolts of two diameters for each monitor. Has some cons: It can be called a disadvantage with a stretch, but: if the table is close to the wall (back) and the position of the monitors horizontally (to the right or left of the operator) must be set exactly (there is a wall or something is already on the table), then find the correct position fastening to the table was possible only with monitors already installed on the bracket. The instruction is scarce - it is not immediately clear that the screw with the indication + and - is responsible for the gas lift force. Moreover, the adjustment itself is strange: you turn the screw in the + direction, it seems that the force changes, but you have to turn the screw for a long time (several turns), and the force changes little and it is not clear whether you can turn it further or if you turn it now and everything will break. For one monitor, the bolts from the kit turned out to be short.