Review on Zalman Performa Performance Powerful Included by Jnis ubars ᠌

The deficiencies of the kit became immediately apparent while beginning the installation of the fan on the motherboard. Because the holes in the plastic "clamps" are smaller than the holes in the "nuts," the "clamps" need to be adjusted in order for the installation to go according to the instructions. After disassembling the native "socket" and attaching the assembled bar from the kit to the reverse side, I noticed that the middle part under the processor rests against the motherboard, and the extreme points (to which the cooler is attached) are in the air, and that the entire structure will rest on the processor socket during installation. This was after I had noticed that the middle part under the processor rests against the motherboard. On the processor side, I disassembled the plastic holder and installed the cooler by using the brackets that came with the kit. I made the decision to keep the "native" bar on the back side of the motherboard (it is pressed closely on an area that is 6x11cm), and on the other side of the motherboard, I decided to leave it where it was.