Review on 30 Ton Bearing Bush Car Repair Tool Set With Universal Press Support Block Plate By 8MILELAKE For Enhanced SEO by Paul Newton

The block plate and accessories did not come in a box, it was in sealed plastic but I got all the parts listed in the description on Revain. I did not receive any instructions or directions. There are two locator plates and each one must be fitted to the main block with three Allen screws (total of six and not 4 as listed in the description). One locator plate was installed fine but as I tried to run up the screws on the other side, the screws became difficult to turn. Each of the three screws on one side of the block became damaged. I'm a very qualified automotive technician and an instructor for several years, it's highly improbable that three screws would damage in succession because of me. I measured the thread and chased them with a die. I repaired all three damaged screws. I took a matching tap and began to chase the threads in the holes of the block. The centre thread was chased all the way through but the two outside holes were too shallow for the die. I looked into the holes with a light and the holes have to be drilled and tapped in order to receive the screws. My labour charge is $100 an hour or any part there of and I have to leave work to get this thing working! Whose going to pay me for this?