Review on Upgrade Your Kitchen With Ufaucet'S Modern Brushed Nickel Single Lever Sink Faucet With Pull Out Sprayer by Rick Marie

After installation, I'm pleased with it. Some helpful hints for the install. 1 The cover plate for a 3 hole sink, barely covered the hot and cold water sink holes. I turned off all the kitchen lights, and just used a light to shine up from below the sink. I applied clear silicone adhesive sealant to the base plate. I had a helper position the base plate , so their was no light shining up, and then tightened down the large plastic nut. 2 I was having a difficult time trying to remove the large plastic nut prior to installation. It would not come off due to interference from the sprayer hose line. I pulled the sprayer line hose back, until it was just visible from below the faucet, and then put clear plastic tape on the top of the faucet to hold it in place. I also tore the excess material on the blue and red label. I left just enough to identify, the cold and hot water lines. These labels were interfering with trying to get the large plastic nut on. I do hope this helps someone. I would have given it a 5 star, if the base plate on the faucet had more material , width wise.