Review on Grinder Tape Grinder Red Metal Grinder CW-11 by Boguslawa Gornicka ᠌

I have long wanted to finally buy it . There are no questions about the delivery, though for some reason the nail puller is written on the box, probably the name of the manufacturer LLC Gvozdoder 2. Now for the machine. The idea is good, but the execution . Maybe I got married. Collected without problems. 1. Drive pulley and barrel roller are not parallel to each other. Nothing else came up with how to bend the tensioner. 2. The drive pulley and the barrel roller are not against each other (this is not due to the fact that I bent the tensioner, if that). I put three large washers between the tensioner and the plate where it is attached. 3. The thrust plate is generally somewhere to the side. I put two washers under the mount. 4. Thrust plate has very sharp torn edges, the tape would probably break very quickly. I sharpened the thrust plate on emery. 5. Small parts are fine to sharpen. Large ones, such as a billhook or an ax, cannot be corrected, beating. As I understand it, the drive pulley is not exactly machined, this can be seen when you start the machine without a belt. I don't know what to do now. Order a drive pulley? Where is the guarantee that the same will not come. It probably won’t work to make a return, it bent there, then corrected it. And this is not Aliexpress, there I would at least ask for a refund of some money. Gentlemen bosses from Gvozdoder 2 LLC. Do you have a quality control department? Do you check at least one machine out of a hundred there? As I understand it, everything is clear on the drawings, maybe there are some failures in the program of machines that drill and sharpen parts. Or do you have it all by hand. I am a pensioner and I feel sorry for 7294. which I gave away.