Review on WINSOON Double Door Sliding Barn Door Hardware Kit With 10Ft Track For Interior And Exterior Doors, Kitchen Cabinets, And Hallways. by Andrew Dinelli

I recommend that you build a header, the drywall anchors provided are good but drywall will only support so much weight, causing most doors to sag somewhere. The pre-drilled holes 16" on center will rarely hit wood, this project hit wood twice over the door frame. I used a poplar 1X4 which measures 3/4 X 3 1/2 from a big box store, screwed into the studs in the wall. The spacers provided have a wide end on one side that is the side that should go against the wall. The instructions for hanging the rollers on the door are vague, the top hole is measurement is correct from the top of the door but the measurement for the bottom hole is from the center of the top hole not the door. Check or you will end up with 3 holes in the top of your door. My door is 2" thick so I went to a big box store and bought longer bolts and painted the heads black. The provided hardware had no problem supporting a larger door. Overall a good product.