ZEKOO Bypass Sliding Barn Door Hardware Kit For Double Doors, Single Track, Flat Track Roller, One-Piece Rail - Available In 4FT To 12FT Lengths, Perfect For Low Ceilings (6FT Single Track Bypass) Review

Once we finally got them hung, I am so happy with our closet doors. The hangers we ordered were a bit problematic. The bolts for mounting the door rollers were too long so we had to cut them off. Also the outdoor track caused the door to hang down further than the indoor door so we had to cut 1/4" off the bottom of the door.That said, they're sturdy and attractive and we would buy them again.

Seller, price and shipping were good.My opening is 6ft wide. Rail is 9ft. I wanted 3ft overhang on one side to allow full access to both washer and dryer at same time. (If you are doing this, don't by 37in doors. I've had to order an additional door thats is 46in wide due to gap left by over hang) in my opening with 2 37in doors mounted per instructions I had an 8 in gab on one side when doors closed due to overlap.Predrilled holes in rails did not line up with 16in studs. Was only going to get

Got the 9ft single bypass rail for a bedroom closet. When the package came, one of the hanger wheels wouldn't turn well, and 2 of the bypass pieces seemed to be missing from the package. I messaged the seller and they responded immediately (within hours) to send a replacement hanger and the missing pieces. They also mentioned in the message that they have a 5 year warranty which seems incredibly long. Very happy with this level of support that isn't always common on ebay.The installation…

Drilled one set of holes and it wasn’t the right placement. Had to drill second set of holes to get the right overlap. Thought the doors were ruined until we decided to buy matching black bolts to fill the holes.Also, make sure the door design layout is right before installing, too. We put them in backwards at first and it was a pain to swap out.One other issue with barn doors—if they aren’t installed perfectly level, the doors roll. Our container cabin walls aren’t perfectly level so we had to

We bought the Zekoo doors and were very impressed with the wood and quality. Not so much for the hardware kit. The directions were awful, seemed like a poor translation to english. The door stoppers did not fit on the rail, I spent over two hours with a file getting them to fit. The Anti-jump pad also did not fit and had to be trimmed in order to fit. Lastly the outside door hanger (single rail system) was not square which required me to bend the brackets as so they were square in order for the

Just installed the double bypass door (2 doors on one track. Couple of pointers.the further you space the brackets from the door's edge the more overlap the doors will have because the brackets hit ach other. I ended up putting them right on the door's edge so that I'd only have about 4" overlap. I had originally out them 2.5 " from edge and the doors did not close my opening entirely because I had like 9" wasted overlap in the middle. Next, go get 8 - #8 screws for the floor track guides since

The hardware kit came well packaged so there were no unexpected dents or problems with the item. The bar is very sturdy. What is really noteworthy was that I needed additional hardware, which the company sent for free, and then I lost a few parts and they again sent out a replacement. This type of customer service is so rare these days and much appreciated!

This is an excellent kit. The center connection doesn’t line up exactly but the rollers are very smooth and sturdy enough to support these 2 massive doors. We have a small bedroom and wanted to do something more effective than the 2 small doors we had. We got this kit, tore out the small wall between the doors, framed it in with 1x’s, and built 2 custom 50” doors out of T&G pine beaded planking from Lowe’s. Finished with 1x4 border and center supports and topped them off with 2 coats of white…

This single track made for a much easier install and didn't require me to put a header board. I had 6.6" from ceiling to top of door opening. This single track bypass worked perfectly for my situation. My wife and I are very pleased. I would recommend this to anyone who has limited space above doors.

This new version is much better than the older 2 rail bypass system (I had bought and mounted the old one previously, and took down to mount this instead), but READ: do NOT mount this unless you’re going directly into studs. The wall anchors are horrible. You’ll be okay if your doors are small/light, but I mounted the 9 ft rail with 2 48 inch doors that added up to too much weight for the rail to support (although under the weight limit listed for the product). We used drilled custom holes in…

The system would work better if each door was on its own track. The doors have to move mostly together. I would return and get something else if I could.

Barn door kit was well packaged and easy to install. Hardware is very sturdy and looks like it will last for a lifetime. Installation took several hours to complete.

These were great. However one was open abs missing parts. I called and they immediate sent a new one. Love my doors my nephew made for me for my birthday!

The door hardware went up smoothly and is very sturdy. Directions were pretty easy to follow. I give the product 4.5 stars only because I am m to one lag bolt, one washer and one spacer short. Any way to get these sent to me? I went to the "zekoohardware.com" website but that site doesn't seem to exist. thank you.

Not hard to install. Unfortunately not a true bypass. Doors would only travel as far as the roller is so you can't fully close or fully open the doors. With that said. The company worked with me to resolve the issue and were very responsive. With that said I would definitely recommend.

the anchor bolts and anchors that are provided are not what you need to attached this to a sheet rock wall. I had to purchase a different set up from Lowes. the anchors would pull away from the wall while attempting to screw in the bolts.

We made our own modern farm doors out of MDF boards and this track/hinges holds up the weight quite nicely. Be sure to measure the thickness and dimensions of your doors and window/space before purchasing. I Love the sleekness.so stylish!

Description says that it’s good for a 1 3/8” depth door, but the bolts for the doors are too long and won’t tighten all the way. Will have to go buy additional washers to make it work appropriately.

I got six screws with the set … there are 8 holes , is it possible to sent 2 more spacers and screws, thank you Thanks for attention.

Quick delivery, packaged well. The bypass sliding barn door kit is of good quality and perfect for our Barn Doors. Fast response when needed a larger size.