Review on ZEKOO Bypass Sliding Barn Door Hardware Kit For Double Doors, Single Track, Flat Track Roller, One-Piece Rail - Available In 4FT To 12FT Lengths, Perfect For Low Ceilings (6FT Single Track Bypass) by Kyle Fritz

Seller, price and shipping were good.My opening is 6ft wide. Rail is 9ft. I wanted 3ft overhang on one side to allow full access to both washer and dryer at same time. (If you are doing this, don't by 37in doors. I've had to order an additional door thats is 46in wide due to gap left by over hang) in my opening with 2 37in doors mounted per instructions I had an 8 in gab on one side when doors closed due to overlap.Predrilled holes in rails did not line up with 16in studs. Was only going to get 1 or 2 lag bolts to catch a stud with the way I needed rail positioned. I might could have gotten another stud or two but was not willing to have unusable rail.When attempting to install with supplied sinkers they pulled straight out of the wall. Lag bolts had barely grabbed sinker when it stripped, causing huge "sinker hole". I opted to buy a 1x3x10 and make a header board, which I secured to the studs and then the rail to the 1x3. After doing this I feel it is secured.Brackets and bolts did not tighten on standard door width, I installed a spacer board on back side to allow secure fit.Overall, satisfied with rail purchase, wish I hadn't bought an extra door. but that's on me.