Review on 🏆 KFI Products Winch Mount for Kawasaki Prairie 360 2x4/4x4 - Improved SEO-Friendly Version by Jonathan Abreu

Fits perfectly on my Kawasaki 360. As others have said, U-bolts are not a constant width. I had to move one of them apart to fit the holes in the panel. The other 3 fit well. I used plastic wire ties to hold the bracket in place while installing the U-bolts as it is difficult to hold while installing the U-bolts. It seems odd that the winch is mounted upside down, but this way it leaves a large area for air to flow directly to the oil cooler. The flat plate helps direct air into the oil cooler. It actually looks pretty good the way it is installed. I installed the Badlands 3500 with no problems, the Fairlead fitted perfectly. Be sure to use shorter bolts inserted back to front to secure fairlead so bolts do not interfere with winch operation. I installed the plate, then the winch, then the fairlead and tightened all the bolts once everything was in place. The screws that attach the winch to the plate were last tightened. The board, like all the others, is too expensive. It cost about half what I paid for the winch when I sold it.