Review on 🔘 XT AUTO 20 Amp LED Round Rocker Toggle Light Switch - Pack of 20: Spst On-Off Control for Car Truck by Lynn Cole

I've only used 3 so far but they work great. I installed some headlights and a light bar on the truck and installed these switches in a plastic cover under the steering column. They have a pretty strong click and feel pretty sturdy. I really like that they have an edge for the key. So when you drill the hole, make a small cut on one side. This will prevent the switch from rotating in the bore. The only thing I don't like is that they don't hold up very well. I used a step drill down to 3/4" and then used a half-round file to press the switch firmly, but when I started routing the wire it pressed on the back of the switch a little and it popped out. So be careful with that. The plastic I installed them in was quite thick so the little gripping prongs didn't pop out the other side. They'll probably stick better to thinner plastic. I'll probably add some silicone on the back, simply because I believe they should be connected to the positive side of the circuit, the other color connection is the ground for the LED, if connected to the negative side the LED will not work, however the switch will work properly even if the LED is not used.