Review on Shock absorbers 100N for LG washing machine (2pcs/set)4901ER2003A by Petar Vachkov

There were problems with the washer: With any movement of the drum, there were clicks, as if the plastic was strongly attached to another plastic and they had a small stroke. In any mode, and at the end and at 400 spins in a delicate mode, the raskolbas began, the washing machine jumped. Moreover, the drum was so thrashing that 7 minutes before the end of the wash, she tried for 10 minutes to reach the spin speed, but apparently the sensor worked, the electronics did not let her, she stopped, mixed the laundry and started a new attempt. Those. time on the screen froze at 7 minutes, and she tried and tried and tried. And all due to the fact that 2 years ago there were such circumstances that it was necessary to wash a woolen blanket, which, to put it mildly, is too heavy for my LG washing machine with a limit of 6 kg. Because of what - the silent blocks of shock absorbers were broken, i. e. the rubber bands in the mounting holes of the shock absorber in the area of ​​​​attachment to the washer were strongly crushed, and the shock absorbers themselves remained the same lubricated and moved with good effort. These are the cases, according to all checks from the Internet - my shock absorbers were working, and when I took it off, I saw that it was their silent blocks. Now everything is fine, it has stopped jumping, it works in all modes, quietly and without clicks. Take care of your washers, do not try to stuff more than it should be into it, and then you will change the shock absorbers very, very rarely.