Review on 🚗 Universal Car Fuel Injector Flush Cleaner Adapter - Kweiny Auto Injection Nozzle Cleaning Assistant Tool by John Akins

So there are those who may not like this product. First, you will most likely get the cleaning liquid on your hands. If it turns you off, walk away from this product. If you don't mind, run to this product. This works very well. One thing I would recommend is NOT leaving the injector on for more than a touch. I touched the positive connection to the positive battery post while holding the injection mold on the fuel cleaner. You need to remove the red atomizer from the cleaner. Carburetor cleaner is almost the same as injector cleaner. I left the injector on for a few seconds at the end to watch the fuel flow out of the injector to make sure it was smooth etc. Again this works very well but you'll probably have some fuel cleaner on your hands. A shopping towel will help solve this problem. Simply connect the power cord (2 cords supplied to see which one fits) to the injector, insert the injector into the white round hole, take the bottom end of the white tube and place it over the carb cleaner. Make sure it is an aerosol version of the carburetor cleaner. If your injector is dirty or clogged, this should help.