🚗 Universal Car Fuel Injector Flush Cleaner Adapter - Kweiny Auto Injection Nozzle Cleaning Assistant Tool Review

You can go for a U tube and learn how to make your own (which I did) but it's a really good low cost alternative that works for worked for me on 2 different motorcycle injectors. (BMW and Kawasaki). Contains 2 fittings of different sizes and is easy to use.

I made one of these a few years ago and needed another so I decided to just buy it as it's the same idea as my old setup. It worked and did the job I needed to do, but was a bit messy and bled a lot cleaner no matter how slow and steady I was. But maybe with more practice I could get better.

Very useful but a bit messy. Before attempting to insert the injector into the plastic handle, the o-ring must be in place in the injector. The injector cleaning container must sit perfectly straight on the plastic handle to avoid spilling your hand. Leather gloves and goggles must be worn.

Very messy to use. You get more carburetor cleaner than an injector. I'll try to fix it with some o-rings. It will do the job, but I wouldn't want to clean with it very much. Note that carburetor fluid will swell on whatever o-ring you use, so don't use the ones you will be using to reinstall the fuel injector.

There are two types of electrical connectors in the kit that will fit your injectors, luckily one of them will fit mine. With my Mazda 3, 6, Cx-7, Cx-9 injectors, the injector adapter did not offer sufficient tightness. I modified it by cutting a 3/8 inch barb fitting from the sprinkler PVC elbow. I then inserted the barb end into the nozzle adapter and filled it with epoxy just in case. When you slide the nozzle adapter onto a can of solvent, Brakleen, Berrymans, etc., solvent should not spill

My truck has done 150,000 miles and the fuel economy isn't as good as it has been in the past. I suspected that the injectors might have accumulated some "junk" over the years, so I decided to give this kit a try. There are two electrical connections and two nozzle holders. I just picked a pair that matched my injectors, grabbed two cans of carburetor cleaner and one injector (the one with the injector on top) (only takes one can) and got to work. I followed the instructions in my Dodge repair…

So there are those who may not like this product. First, you will most likely get the cleaning liquid on your hands. If it turns you off, walk away from this product. If you don't mind, run to this product. This works very well. One thing I would recommend is NOT leaving the injector on for more than a touch. I touched the positive connection to the positive battery post while holding the injection mold on the fuel cleaner. You need to remove the red atomizer from the cleaner. Carburetor…