Review on 🛠️ FEL-PRO 1250 S-3 Intake Manifold Gasket Set with Enhanced SEO by Jesse Francilme

Used to fix a typical SBF coolant leak from the front driver's side. The original fiber seal is crushed after re-tightening to reduce leakage a second time. Fel-Pro 1250S3 Manifold Gasket Kit. Used on AFR-185 heads and Holley Systemax bottoms with factory Ford torque shift. The connections do not match the seal. The gasket is slightly larger than the manifold. Decided to just use a dab of 440-B Gasgacinch to hold it in place and covered the water jackets with Permatex 82195 Ultra Gray High Torque RTV Silicone Gasket just in case. Discard the cork gaskets and apply a heavy coat of RTV to seal the manifold. Use a new o-ring on the manifold as the old one is most likely torn, cut or bulged. Lubricate with oil.