Review on 🔑 High-Performance 4 Pin Ignition Key Switch - Suitable for Sunl, Roketa, Kazuma & Other Chinese-Made 50cc-125cc Quad ATVs, Dirt Bikes, Pocket Bikes and More - Reliable 4-Wire Component for Enhanced Functionality by Will Randles

Very cheap wiring, it's 16AWG insulation but after removing it (which I had to do to properly solder the wires to make it work on my style bike ), they fake 16-AWG. There is very little copper wire, it's mostly insulation. This ignition switch has the correct connector to connect to my diamo ls200 bike but the wiring is wrong. If you are buying this for the Diamo you will need to cut the wiring and reverse it so the red wire on the ignition switch connects to the green wire and the remaining unconnected wires solder together. This is the correct wiring for Diamo bikes where the red wire on the BIKE connects to the black wire on the BIKE that runs diagonally on the bike connector. This ignition switch comes with wires side by side and wires that will not work side by side. Actually, they should run diagonally to each other. That was my case with the Diamo Dual Sport, but other bikes are probably different and not necessary. Double check your bike's gears or it will short out, which happened to me, luckily it just blew the fuse.