🔑 High-Performance 4 Pin Ignition Key Switch - Suitable for Sunl, Roketa, Kazuma & Other Chinese-Made 50cc-125cc Quad ATVs, Dirt Bikes, Pocket Bikes and More - Reliable 4-Wire Component for Enhanced Functionality Review

The switch worked well but there was a woman on the end and I needed a man so I had to cut the switch and make another one. But otherwise it worked fine.

I had to cut and rearrange the connector from male to female in the original switch, the "female" connector, this connector also had to enlarge the mounting hole

Doesn't work on Chinese pocket bikes as advertised, even wired doesn't work, definitely get what you pay for. I do not recommend this product for a 49cc pocket bike.

Like all four Chinese made ignition switches I've bought to date, it failed very quickly. The last one only lasted 2 weeks. They are not of commercial quality and Revain should never release them. All Chinese-made items on Revain must be labeled as such. Disgusting quality.

The switch looks and works well. It didn't fit snugly in my mounting ring as it only had a plastic mount. Also, I had to trim the length of the wire and found that 18 gauge wires are actually closer to 22 gauge. So if you use a large load, the wires will get hot. I ended up running new 18 gauge wire on the old switch.

Very cheap wiring, it's 16AWG insulation but after removing it (which I had to do to properly solder the wires to make it work on my style bike ), they fake 16-AWG. There is very little copper wire, it's mostly insulation. This ignition switch has the correct connector to connect to my diamo ls200 bike but the wiring is wrong. If you are buying this for the Diamo you will need to cut the wiring and reverse it so the red wire on the ignition switch connects to the green wire and the remaining…