Impala 3.9L 2009, friends complained of long soft shifts and slight slippage when starting from a standstill. After hooking up a pressure gauge to the pressure port, I found that the EPC Solenoid was faulty and found low line pressure across the board when I checked the pressure with a scanner and set various amps and compared to the pressure chart. There was also an area where the pressure on command stayed in the 400 milliamp range at 110psi, which definitely suggests the problem isn't with the pump. I removed the side cover after lowering the subframe and replaced the EPC solenoid with this Acdelco part along with a new filter and fluid. I erased TAPS or layer adjustment with a scanner. Reconnect the gauge and check the line pressure and all pressures were within the specified range. Did a test drive and the circuit sits well and no longer slips when starting.
Zento Deals 8 Pieces of 6 Ohm 50W Load Resistors β Eliminate Flickering LED Turn Signal Lights, License Plate Lights, and DRL
9 Review
Electrical AFD0097 3F1U 10300 AA 3F1Z 10346 AB VP3F1U 10300 AA
10 Review
π Powermaster 47294 Alternator: Unleash Your Vehicle's Power!
9 Review
π‘ 57294 Powermaster Alternator
9 Review
ARANA C16-08568 20" Gas Lift Struts - Perfect For Trucks, RVs, And Boats - 20 Lbs Capacity - 2Pcs Set
15 Review
MICHELIN Energy XM2+ 175/70 R13 82T summer
29 Review
Tires pirelli formula energy 225/50r17 98y xl
14 Review
2 Vepagoo 10In 13Lb/58N Gas Shock Spring Strut Lift Support For Cabinet Door Truck Tool Toy Box Lid - C16-03213
13 Review