Review on 🚰 Fapully Commercial Kitchen Faucet with Pull Down Sprayer - Brushed Nickel Finish by Micael Rau

I had high hopes for this faucet and tried my best to make it work. But the blender is heavy. If you have a stainless steel sink, it wobbles, period. I wanted this to work so bad I bought a 1/8" aluminum rod and a 1 3/8" hacksaw and made backing plates under the top board (sold separately) and then two longer boards under the sink. I spent several hours on this and made several visits to the local hardware store. After all it is securely installed but still rocking and not secure. If I had a marble counter I would leave it. Another poorly written guide. Basically they don't. There is a map with absolutely zero relevant information. For example, if you are installing hoses into a case, say: Lightly lubricate the seals with silicone grease and use a wrench to hand-tighten these connections only about 1/4 turn. Otherwise you will crush the seals. WARNING. The hoses are quite short compared to, for example, a Delta faucet. I had to buy extension cords, these are available if you have a good stock hardware store nearby and have the time. After installation, the device keeps leaning forward and the spring part is not seated properly. And then spray. It really squirts and squirts everywhere. I have normal house water pressure and after using this faucet for dinner the cleaning water was everywhere. I'm returning it and it's a pity they can't reimburse me for the hours and other expenses I put into getting this thing to work. . They really need to update their description and instructions and warn those who don't have a marble top so they know what they're getting.