Review on 🔴 AIMILAR Red LED Display Car Motorcycle Voltmeter - 12V Digital Voltage Meter Gauge by Michael Foster

I really like this meter so far. My bike had electrical problems earlier in the summer and a low voltage flashing meter reading gave me timely warning to take action. I removed all the fuses except for the ignition circuit so I had enough battery power to drive the 60 miles home. During the installation of the meter I measured that the current drawn was about 0.030 amps. I connected the meter to the motorcycle's ignition so the battery doesn't drain when the engine is off. At 14 volts it is within 0.1 volt of the battery voltage measured with another multimeter. Lower voltages with the engine off will have a larger error of about 0.4V, but this is normal. This is a property of the metering point I chose and not the meter's fault. I attached my mount with 3M double sided tape. The display is better than expected and usually easy to see. Very bright sunlight can complicate things, but I didn't have a perfect mounting option. The gauge isn't to blame either.